Papel

Inverter AIr PlAsmA Cutter
model 95136
set uP And OPerAtIng InstruCtIOns

visit our website at: http://www.harborfreight.com

read this material before using this product.
Failure to do so can result in serious injury.
sAve thIs mAnuAl.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shapeor form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.
manual revised 10enOtICe is used to
address practices not
related to personal injury.

sAve thIs mAnuAl
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receiptin a safe and dry place for
future reference.

ImPOrtAnt sAFetY
InFOrmAtIOn
In this manual, on the labeling, and
all other information provided with
this product:

CAutIOn, without the
safety alert symbol, is
used to address practices not
related to personal injury.

sAFetY WArnIngs And
PreCAutIOns
WArnIng: When using tool, basic safety
precautions should always be followed
toreduce the risk of personal injury and
damage to equipment.
read all instructions before using this
tool!

this is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
dAnger indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.WArnIng indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.
CAutIOn, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.

Page 2

WArnIng!
reAd And understAnd All
InstruCtIOns
Failure to follow all instructions listed
below may result in electric shock,fire, and/or serious injury.
sAve these InstruCtIOns

Work Area Precautions
1.

Keep your work area clean and well
lit. Cluttered benches and dark areas
invite accidents.

2.

do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases,
or dust. Power tools create sparks
which may ignite the dust or fumes.

3.

Keep bystanders,children, and
visitors away while operating a power
tool. Distractions can cause you to lose
control. Protect others in the work area
from debris such as chips and sparks.
Provide barriers or shields as needed.

For technical questions, please call 1-800-444-3353.

SKU 95136

electrical safety
1.

2.

3.

4.

5.

grounded tools must be plugged
into an outlet properly installed andgrounded in accordance with all
codes and ordinances. never remove
the grounding prong or modify the
plug in any way. do not use any
adapter plugs. Check with a qualified
electrician if you are in doubt whether
the outlet is properly grounded. If the
tool should electrically malfunction or
break down, grounding provides a low
resistance path to carry electricity away
from the user.double insulated tools are equipped
with a polarized plug (one blade is
wider than the other). this plug will
fit in a polarized outlet only one way.
If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician
to install a polarized outlet. do not
change the plug in any way. Double
insulation eliminates the need for the
three...