Pegamentos Tecnicos

PRODUCT BULLETIN • SPECIFICATIONS

705
PVC Solvent Cement
GENERAL DESCRIPTION: Weld-On 705, is a clear, gray or white, medium bodied, fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 6” diameter, Schedule 80 through 4” diameter. Can be used without primer on non-pressure systems if local codes permit. APPLICATION:Weld-On 705 is for use on all types of PVC plastic pipe applications, Type I and Type II. It is approved for use with potable water pressure systems, irrigation, conduit, foam core, industrial pipe applications, sewer, drain, waste and vent (DWV) systems. Detailed directions on making solvent cemented joints are printed on the container label. An installation video covering solvent cementing isavailable. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer. NOTE: IPS Weld-On solvent cements must never be used in a PVC system using or being tested by compressed air or gases. AVAILABILITY: This product isavailable in 3/4 oz. tubes (clear only), 1/4 pint, 1/2 pint, pint, quart and gallon metal cans. 705 white is available in pint, quart and gallon size containers. For detailed information on containers and applicators, see our current Price List. STANDARDS AND APPROVALS: Weld-On 705 meets ASTM D-2564 and is listed by NSF International for use on potable water, sewer, drain, waste and vent systems.It is listed by the International Association of Plumbing & Mechanical Officials (IAPMO) and carries the Uniform Plumbing Code (UPC) seal. Weld-On 705 (gray only) is listed by the Canadian Standards Association (CSA) for pressure and non-pressure applications. This cement is suitable for use with PVC piping systems approved by (SBCC) Southern Building Code Congress and (BOCA) Building OfficialsCongress of America. SPECIFICATIONS: COLOR: RESIN : SPECIFIC GRAVITY: BROOKFIELD VISCOSITY: MAX VOC EMISSIONS: Clear, Gray or White PVC 0.920 ± 0.040 Minimum 500 cps @ 73 ± 2°F 600 G/L, per SCAQMD Rule 1168, Method 316A

SHELF LIFE: 3 years expectancy in tightly sealed containers. The date of manufacture is stamped on the bottom of the container. Stability of the product is limited by thepermanence of the container and the evaporation of the solvent when container is open. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding of thinners to change viscosity is not recommended. SHIPPING: Shipping Information for Containers Larger than One Liter: DOT Shipping Name: Adhesive. DOT Hazard Class: 3. Identification Number: UN 1133. Packaging Group: II.Label Required: Flammable Liquid. Shipping Information for Containers Less than One Liter, using DOT Packaging Exception(s): DOT Shipping Name: Consumer Commodity. DOT Hazard Class: ORM-D.
©IPS Copyright M-705-0603A

SAFETY PRECAUTIONS: This product is flammable and considered a hazardous material. In conformance with the Federal Hazardous Substances Labeling Act, the following hazards andprecautions are given. Purchasers who may repackage this product must also conform to all local, state and federal labeling, safety and other regulations. DANGER - EXTREMELY FLAMMABLE - VAPOR HARMFUL - MAY BE HARMFUL IF SWALLOWED - MAY IRRITATE SKIN OR EYES Keep out of reach of children. Do not take internally. Keep away from heat, spark, open flame and other sources of ignition. Vapors may igniteexplosively. Keep container closed when not in use. Store in the shade below 110°F (44°C). Avoid breathing of vapors. Use only in well ventilated area. If confined or partially enclosed, use forced ventilation. When necessary, use local exhaust ventilation to remove harmful airborne contaminants from employee breathing zone and to keep contaminants below 25 ppm TWA. Atmospheric levels must be...