Plplanos

MANUFACTURER: BIDDER:
OPERATING CONDITIONS (B)*
SERVICE: Milk of Lime Supply to Regrinding Mill Discharge Box LIQUID PUMPED: Dilute Milk of Lime
FLOW RATE Design/Balance, m3 / h 44 / SPECIFICGRAVITY Solids / Slurry 2,7 / 1,1
TOTAL HEAD, m 61.3 % BY WEIGHT 14% % BY VOLUME
STATIC HEAD,m 3.5 d80 (80% Passing) microns 50
SUBMERGENCE AVAILABLE m 0,5 LARGEST PARTICLE SIZE, micron 500
FROTHFACTOR 1 VISCOSITY, @ 15 oC CST 0,00005
PUMPS OPERATING 1 oper / 1 stand by VAPOR PRESSURE, kPa(Abs)
PIT DEPTH m pH 10 - 12
PUMP LOCATION Indoor TEMPERATURE, °C 20
OPERATION SCHEDULE Continuous PUMPDISCHARGE Single / Surface
HRS./DAY 24 DAYS/YR. 365 SOLIDS CHARACTERISTICS Mildly abrasive
NUMBER OF STARTS PER HOUR ( S )
AMBIENT TEMP RANGE,°C 5 to 20 MOTOR HEATERS REQ'D: X YES NO
ELEVATIONABOVE SL, m
ENVIRONMENT Wet and dusty
SPECIAL REQUIREMENTS: Note: Flow deternined for non-settling of solids in pipe (velocity 3 ~ 4 m/s) and 4" pipe
CAPACITY AND POWER DATA (S)
PROPOSAL CURVE NO.RECOMMENDED MOTOR kW RPM
TOTAL HEAD, m MAX. BHP FOR IMPELLER SIZE
EFFICIENCY, % FLOW, m3 / h
BRAKE kW MAX. ALLOWABLE SPEED, RPM
PUMP SPEED, RPM SPECIFIC SPEED
SUBMERGENCE REQUIRED m NUMBER OF STAGESGENERAL (S)
MODEL NO. ( S ) CONNECTIONS: DISCHARGE
PUMP SIZE mm ( S ) I.D., mm ( S )
IMPELLER DIA. mm ( S ) FLANGE SIZE, mm ( S )
MAX. WORKING PRESS., kPa(g) ( S ) FLANGE RATING, Kpa. ( S )HYDROSTATIC TEST PRESS., kPa(g) ( S ) FLANGE FACING ( S )
PUMP LENGTH (Base plate to bottom of pump, mm) ( B )
IMPELLER ROTATION CW CCW ( S )
* 1. (B) INDICATES BUYER. (S) INDICATES SELLER
2. ALL (B)ITEMS SHALL BE COMPLETED BY BUYER. ALL (S) ITEMS SHALL BE COMPLETED BY SELLER
3. NOT APPLICABLE (NA) SHALL BE ENTERED WHERE INFORMATION IS NOT RELEVANT
1 LR LR LR PO
0 16-Jun-08 GPL MM EG SC
B16-11-2007 JA SL EG SC
A 12-07-2007 JA SL EG SC
REV. DATE DESCRIPTION BY CHECK EGS PE OWNER
JOB N° 25341 REV
REGRIND MILL M.O.L. DAILY TANK PUMP MR: 25341-220-MRA-MHGL-00001
3510-1520-11-01/02...