Portable Smart Filter Cart

Portable Filter Carts
Models 5MFP & 10MFP with Moduflow™ and SmartCart

Applications for Portable Filter Carts
• Filtering new fluid before putting into service • Transferring fluid from drums or storage tanks to system reservoirs • Conditioning fluid that is already in use • Complimenting existing system filtration • Removing free and emulsified water from a system • For use with fluids such ashydraulic, gear and lube oils Parker portable lter carts are the ideal way to pre lter and transfer uids into reservoirs or to clean up existing systems. Fluid should always be ltered before being put into use. New uid is not necessarily clean uid. Most new uids (right out of the drum) are un t for use due to high initial contamination levels. Contamination, both particulate and water, may be addedto a new uid during processing, mixing, handling and storage. Water is removed by installing Par-Gel™ elements in the outlet lter. Par-Gel™ elements are made from a polymer which has a very high a nity for free water. Once water comes into contact with this material, it is removed from the system. e Parker portable lter cart uses two high capacity ModuFlow™ Plus lters for long element life andbetter system protection. e rst stage (inlet) lter captures larger particles, while the second stage (outlet) lter captures ner particles or removes water. A rugged industrial quality gear pump gets the job done fast. Using a Parker portable lter cart is the most economical way to protect your system from the harm that can be caused by contamination.

Features
• Two lters instead of one w/ 2.5times increased dirt holding capacity • Wide variety of particulate elements available • Par-Gel™ water removal elements available • Heavy duty frame • Lightweight and portable

Advantages
• Pump protection and long element life

Benefits
• Element cost savings and trouble-free service

• Capable of getting a uid to a desired cleanliness level • Removes “free water” from a system • Rugged anddurable • Easy to move from place-to-place • Enables use in low or high viscosity applications • Additional hardware not necessary

• Extends uid life and system performance • Gets dirt and water out of system with one process • Built to last • One person operation

• Two ow rates available: 5 gpm or 10 gpm • Eleven-foot hose and wand assemblies included

• Matched to your needs

• Readyto use as received

2

Features
Hose & wand assembly • Ready to use; no additional hardware needed • Flexible hoses for tight spots • Kink-resistant hose prevents pump cavitation Visual indicator • Tells you when to change element

Icount PD (SmartCart option) • Early warning LED or digital display indicators for Low,Medium and High contamination levels • Self diagnostic software

Servicecover • Top-accessible for easy changing of elements

Heavy Duty frame • Rugged and built to last

Electrical Cord • 6 ft. with ON/OFF switch • Optional 20 ft. cord with retractable reel & mounted power switch with thermal overload protection

Dual filters • Two stage, double length ltration for long element life and pump protection 110V/220V AC motor • Industrial brand name

Elements (notshown) • Available for both particulate and Water Removal (WR) in double length w/ 2.5 times increased dirt holding capacity

Gear pump • Industrial quality • Quiet operation • Dependable, long life

Drip tray • Helps keep the work area safe and clean

3

Specifications:
Maximum Recommended Fluid Viscosity: 5MFP – 3000 SUS (647cSt) 0.85 speci c gravity 10MFP – 500 SUS (108 cSt) 0.85speci c gravity Visual Indicator (outlet lter): Visual di erential type 3-band (clean, change, bypass) Filter Bypass Valve Settings (Integral to Element): Inlet – 3 psid (0.2 bar) Outlet – 35 psid (2.4 bar) Operating Temperature: Seal option “B” (standard) -40°F to +150°F (-40°C to +66°C) Electrical Service Required: 5MFP – 110/220 volts, 60/50 Hz, single phase, 8/4 amps 10MFP – 110/220 volts, 60/50...