Potencia Pioneer-M1200

Before Using This Product
BRIDGEABLE POWER AMPLIFIER AMPLIFICATEUR DE PUISSANCE PONTABLE
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you toget the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guardagainst this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: • Start your volume control at a low setting. • Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: • Set the dial and leave it there. Taking a minute to do this now will help to preventhearing damage or loss in the future. After all, we want you listening for a lifetime. Thank you for purchasing this PIONEER product. It is designed to give you many years of enjoyment. PIONEER SUGGESTS USING A PROFESSIONAL INSTALLER DUE TO THE COMPLEXITY OF THIS PRODUCT. Please read all instructions and WARNINGS in this manual before attempting operation. Should you have any questions, contact yournearest Pioneer authorized dealer or installation specialist.

Composition of Manual
This manual applies to the GM-X962 and GM-X862. However, the illustrations show the GM-X962.

WARNING
• Always use the special red battery and ground wire [RD-223], which is sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body. • Donot touch the amplifier with wet hands. Otherwise you may get an electric shock. Also, do not touch the amplifier when it is wet. • For traffic safety and to maintain safe driving conditions, keep the volume low enough so that you can still hear normal traffic sound. • Check the connections of the power supply and speakers if the fuse of the separately sold battery wire or the amplifier fuse blows.Detect the cause and solve the problem, then replace the fuse with another one of the same size and rating. • To prevent malfunction of the amplifier and speakers, the protective circuit will cut the power supply to the amplifier (sound will stop) when an abnormal condition occurs. In such a case, switch the power to the system OFF and check the connection of the power supply and speakers. Detectthe cause and solve the problem. • Contact the dealer if you cannot detect the cause. • To prevent an electric shock or short-circuit during connection and installation, be sure to disconnect the negative (–) terminal of the battery beforehand. • Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Be sure to protect all cables and important equipmentsuch as fuel lines, brake lines and the electrical wiring from damage.

Owner’s Manual

Important
The serial number of this amplifier is written on the bottom of the unit. For your own security and convenience, write it down on the enclosed warranty card. Keep the card handy for future reference.

GM-X962 GM-X862
Mode d’emploi

We Want You Listening For A Lifetime
Used wisely, your newsound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection. Decibel Level Example 30 Quiet library, soft...