Probador De Descargas

Impulse 6000D/7000DP

Defibrillator/External Pacer Analyzer
Technical Data
The Impulse 6000D Defibrillator Analyzer and
Impulse 7000DP Defibrillator/Transcutaneous Pacer
Analyzer Test Systems are rugged, portable precision test instruments that ensure proper operation
and ultimate performance of critical life-support
cardiac-resuscitation equipment.
The Impulse 6000D and Impulse 7000DPtest
capabilities encompass the spectrum of worldwideestablished pulse shapes, showcase breakthrough
AED technology compatibility, and outperform in
accuracy and standards. Additionally, the Impulse
7000DP incorporates the tests and the extensive
range of test loads and measurement algorithms
needed to test external transcutaneous pacemakers.
In conjunction with an Impulse 7000DP,
theImpulse 7010 Defibrillator Selectable Load
Accessory provides multiple loads of 25 Ω, 50 Ω,
75 Ω, 100 Ω, 125 Ω, 150 Ω, and 200 Ω for defibrillator performance testing.* A standard USB interface
enables computer control and data transfer, and
optional Ansur PC-based automation software
increases productivity by outfitting users with an
easy-to-use method to standardize testing procedures andcapture, print and document data.

*Impulse 7010 Defibrillator Selectable Load Accessory not
intended to be used for calibration of medical equipment.

Key features

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Impulse 7010 Defibrillator Selectable Load Accessory provides multiple loads of 25 Ω , 50 Ω , 75 Ω ,
100 Ω , 125 Ω , 150 Ω , 175 Ω , and 200 Ω to comply with IEC 60601-2-4 standard(optional)*
Lown, Edmark, trapezoidal, biphasic and pulsed-biphasic defibrillation technology compatibility
A ED technology compatibility
First-class measurement accuracy ± 1 % of reading + 0.1 J
Intuitive user interface and backlight, easy-to-read display
Portable, rugged, easy to carry
Long-lasting, rechargeable battery
Pacer brand selections
Pacer input protected against defibrillatoroutput (7000DP only)
10 independent ECG outputs that provide 12 lead combinations for standardized clinical signals
Flexible heart-rate settings (1 BPM step) facilitate rate meter accuracy and alarm testing
DSP-based measurements enable future firmware and waveforms upgrade
Unique integrated posts for secure connections
T wo-year extended warranty (no-cost extended warranty available afterfirst-year calibration at any Fluke
Biomedical authorized service center)
Optional Ansur test automation software to standardize testing procedures, capture waveforms and test
results, and print and document test results
Designed, tested, and built to incomparable Fluke quality standards

General
specifications
Operating temperature

10 °C to 40 °C (50 °F to 104 °F)

Storage temperature-20 °C to 60 °C (-4 °F to 140 °F)

Humidity

10 % to 90 % non-condensing

Display

LCD display

Communications

USB device port for computer control

Modes of operation
Manual and remote

Power

Internal rechargeable NiMH
battery pack for nine hours
(typical) operation after full charge
or the battery charger can operate
the analyzer and charge the
battery simultaneouslyBattery charger

100 V to 240 V input, 15 V/1.5 A
output. For best performance,
the battery charger should be
connected to a properly grounded
ac receptacle

Enclosure

ABS plastic housing

Dimensions (WxDxH)

32 cm x 24 cm x 13 cm
(13 in x 9.5 in x 5 in)

Weight

3.02 kg (6.6 lb, 0.1 oz)

Safety standards

CE: IEC/EN61010-1 2nd Edition;
Pollution degree 2CAN/CSA-C22.2 No 61010-1;
UL61010-1
C-Tick: Australian EMC

Electromagnetic compatibility
standards (EMC)
European EMC: EN61326-1

Defibrillator analyzer
technical
specifications
Energy output measurement
Compatible defibrillator
waveshapes

Lown, Edmark, trapezoidal,
dc biphasic, and ac pulsed
biphasic
Note: AC pulsed biphasic waveform has
not been approved in the United States.

Pulse...