Profesional

HWS Series

PACKAGED WATER SOFTENERS

OPTIONAL: Preloaded, skid mounted, prepiped and prewired

All Brass Multiport Valve

Fiberglass Reinforced Resin Tank

Safety Overflow
Polyethylene Brine Tank

Salt Platform

HWS SERIES SOFTENERS OFFER:
Over the years, Hurst Boiler has built a reputation as an industry standard for high quality water treatment systems and equipment. HWS SeriesSofteners reflect that overall commitment to excellence, and are fabricated using field tested designs with a proven record of service reliability. Designed for “Multiple Applications" HWS Series Water Softeners are designed to fit the requirements of many types of commercial and industrial applications. Operating Specifications: Pressure Range 25 to 125 psi. Temperature Up To 110 ºF ElectricalRating 120V / 60Hz 220V / 50Hz (Available on request) Check with factory for other operating conditions.

Simplicity

Uncomplicated straightforward valve and brine system design coupled with rugged corrosion resistant tank construction ensures years of "trouble-free" field operation.

Low Maintenance

HWS Series Softeners are fabricated using high quality components to minimize maintenancerequirements. If the need for service should arise, all valves, distributors, and operational components are easy to reach. All components are standard and readily available from stock.

Fully Automatic Operation

Standard integral time clock controller can be preset to initiate regeneration automatically at desired time intervals. If softened water usage increases unexpectedly, simply depressthe manual regeneration lever and the unit will regenerate automatically and return to service without having to reset the time clock.

1 1/2” Twin Alternating Valve

1 " Valve with meter option (Electronic)

3" Valve

1 1/2" Valve with meter option

2" Valve with meter option

5 Cycle, Motor Driven Control Valve:

HWS Softeners utilize motor driven, corrosion resistant, all brassmultiport control valves. These valves offer reliable operation and do not depend on water pressure for initiation of regeneration thereby eliminating problems caused by fluctuating water pressure. All four regeneration cycles (backwash, brining, slow rinse and brine tank refill) are fully adjustable. Single units offer an automatic hard water bypass during regeneration for uninterrupted service.Optional Skid Mounted, Prepiped, and Prewired:

HWS softener resin tanks can be mounted on a steel skid and supplied with factory installed interconnecting piping and wiring. This will ensure quick "trouble free" installation and reduce installation costs. Available on twin alternating systems only.

Tough Corrosion Resistant Resin Tanks:

Automatic Backwash Control:

HWS Softenersutilize a patented self-adjusting flow control to maintain accurate backwash flow rates regardless of line pressure fluctuations. This control is factory installed and requires no field adjustment.

HWS series mineral tanks are constructed of fiberglass reinforced polyester. All tanks are designed and built for 150 psi working pressure.

Tough Corrosion Resistant Brine Tanks:

Optional MeterOperation:

Rigid, polyethylene brine tanks with dust tight covers are completely corrosion resistant and stand up well to everyday physical abuse.

Should the demand for soft water fluctuate often, you may specify an optional reset water meter which initiates regeneration on a "gallons used" basis. You may select a mechanical auto-reset water meter or an electronic demand type meter.

HighPlatform Salt System:

Optional Twin Alternating Operation:

Our exclusive high platform salt system keeps brine clean and, therefore, allows the use of most grades of salt. Salt mushing and bridging are virtually eliminated because only an essential amount of salt is moistened for each regeneration.

HWS Twin Alternating Softener systems are designed to assure you of a fully regenerated...