Programa
Password:
Password:
router# line console 0
^
% Invalid input detected at '^' marker.
router#line console 0
^
% Invalid input detected at '^' marker.router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#line console 0
router(config-line)#password cisco
router(config-line)#loginrouter(config-line)#exit
paea guardad
Press RETURN to get started!
configuracion router 1
User Access Verification
Password:
Password:
Password:
router>
router>
router>
router>enablePassword:
router#copy ru
% Incomplete command.
router#copy runinnig-config startup-config
confugurando rauter
configuracion router 1
User Access Verification
Password:
Password:
Password:router>
router>
router>
router>enable
Password:
router#copy ru
% Incomplete command.
router#copy runinnig-config startup-config
^
% Invalid input detected at '^'marker.
router#
router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
router#configure terminal
Enter configuration commands, one perline. End with CNTL/Z.
router(config)#interface fastEthernet 0/0
router(config-if)#ip adress 192.168.1.2 255.255.255.128
^
% Invalid input detected at '^' marker.router(config-if)#ip address 192.168.1.2 255.255.255.128
router(config-if)#no shutdown
serial
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.router(config)#interface serial 0/0/0
router(config-if)#ip addres 192.168.1.225 255.255.255.252
router(config-if)#
guarpar
router#copy running-config startup-config
Destination filename [startup-config]?Building configuration...
[OK]
router#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.1.2 YES manual...
Regístrate para leer el documento completo.