Pt practice sba

Dispositivo Router1 Switch1 Switch2 PC1 PC2

Interfaz Fa0/0 Fa0/1 VLAN1 VLAN1 NIC NIC

Dirección 172.16.1.1 172.16.1.33 172.16.1.2 172.16.1.34 172.16.1.30 172.16.1.35

Máscara 255.255.255.224255.255.255.240 255.255.255.224 255.255.255.240 255.255.255.224 255.255.255.240

Gateway na na 172.16.1.1 172.16.1.33 172.16.1.1 172.16.1.33

Step 1: Connect the Devices. Connect the followingdevices using the appropriate cable: a. Connect PC1 to Switch1. b. Connect Switch1 to the Fa0/0 interface on Router1. c. Connect Switch2 to the Fa0/1 interface on Router1. d. Connect PC1 to the Router1console port. Step 2: Determine the IP Addressing Scheme. Design an addressing scheme and fill in the Addressing Table based on the following requirements: a. Subnet the address space 172.16.1.0/24 toprovide 30 host addresses for LAN 1 while wasting the least amount of address space. b. Assign the first available subnet to LAN 1. c. Assign the lowest (first) host address in this subnet to the Fa0/0interface on Router1. d. Assign the second address in this subnet to the VLAN 1 interface on Switch1. CCNA Exploration Network Fundamentals ENetwork Basic Configuration PT Practice SBA e. Assign thehighest (last) host IP address in this subnet to PC1. f. Using the next available subnet, further subnet it to provide 10 host addresses for LAN2 while wasting the least amount of address space. g.Assign the lowest (first) host address in the LAN2 subnet to the Fa0/1 interface on Router1. Step 3: Configure Router1. a. Configure Router1 with the following basic parameters: The router name isRouter1. Router(config)#hostname Router1 The privileged EXEC mode uses the following encrypted password: class Router1(config)#enable password class Router1(config)#service password-encryption EnableTelnet and console line login using the following password: cisco Router1(config)#line vty 0 4 Router1(config-line)#password cisco Router1(config-line)#login Router1(config-line)#exit Configure the...