Purified Water Systems

Operating principle

Technical data
Model
flowrate (1)
Genesys 1A
Genesys 2A
Genesys 3A
Genesys 4A
Genesys 5B
Genesys 6B
Genesys 7B
Genesys 8B
(1)
(2)Outlet
conversion (l/h)
300
500
800
1,100
1,600
3,000
5,000
6,500

System
75%
75%
75%
75%
75%
75%
75%
75%

Width
(mm)
2,400 (2)
2,400 (2)2,400 (2)
2,400 (2)
2,900
2,900
2,900
2,900

Depth
(mm)
1,600
1,600
1,600
1,600
1,600
1,600
1,600
1,600

Height
(mm)
2,200
2,200
2,200
2,2002,200
2,200
2,200
2,200

Actual flowrate dependent on feedwater temperature and site feed water quality. Each system is designed on client
exact requirements
Unitscan be delivered in larger frame to allow future flowrate increase

Purified Water Systems
The pretreated (softened) water is passed throuh a filter housing(typically 5 μm)
and analysed for free Chlorine prior to entering the RO feed tank. The filtered
water then enters the stainless storage tank, if the tank is full thesoftened water
is returned to the raw water tank to ensure constant movement to minimize the
risk of bacterial proliferation.
The softened water is then pumped at highpressure using a stainless steel
multistage centrifugal pump, through the RO membranes. The RO permeate is
then fed through a membrane degasser to remove dissolvedCarbon Dioxide,
followed by a CEDI unit in order to remove ionic contaminants.

Material specifications

Feed water requirements

• Softened water tank 316LStainless Steel vessel
• Reverse osmosis 316L Stainless Steel
• CEDI LX FDA approved materials
• Pipework 316L Stainless Steel, orbital welded, Internal
surface finish