Redes

PT Activity 1.2.4: Build a Hierarchical Topology
Topology Diagram

Learning Objectives
• Add devices to a topology
• Connect the devices

Introduction
Packet Tracer is integrated throughoutthis course. You must know how to navigate the Packet
Tracer environment to complete this course. Use the tutorials if you need a review of Packet Tracer
fundamentals. The tutorials are located inthe Packet Tracer Help menu.
This activity focuses on building a hierarchical topology, from the core to the distribution and access
layers.
All contents are Copyright © 1992–2007 Cisco Systems,Inc. All rights reserved. This document is Cisco Public
Information. Page 1 of 3

CCNA Exploration LAN Switching and Wireless: LAN Design PT Activity 1.2.4: Build a Hierarchical Topology

Task1: Add Devices to the Topology
Step 1. Add the missing distribution layer routers and switches.
• The routers you need are located in Custom Made Devices. R1 and R3 are 1841 routers. Ctrl- clickthe
1841 router to add more than one. Press ESC to cancel. R2 is a 2811 router.
• Now add the S1, S2, and S3 distribution layer switches using the 2960-24TT model
Step 2. Add the remaining accesslayer switches.
Following the topology diagram, add 2960-24TT switches to complete the rest of the access layer.
Remember you can use press Ctrl-click to add multiple devices of the same type.
Step3. Change the display name for each new device.
• Click a device to open its configuration window.
• Select the Config tab to access the basic configuration options.
• In Global Settings underDisplay Name and Hostname, type the name for the device shown in the
topology diagram.
• Repeat the process for all the new devices that you added. Although Packet Tracer does not
grade adding thedisplay names, this step must be completed to successfully complete this activity.
Step 4. Check results.
Your completion percentage should be 14%. If not, click Check Results to see which required...