Refrigeracion

HVAC Water Chillers
and Cooling Towers
Fundamentals, Application,
and Operation

Herbert W. Stanford
Stanford White Associates Consulting Engineers, Inc.
Raleigh, North Carolina, U.S.A.

m
MARCEL

MARCEL D EKKER, I NC.

NEW YORK • BASEL

Library of Congress Cataloging-in-Publication Data
A catalog record for this book is available from the Library of Congress
ISBN:0-8247-0992-6
This book is printed on acid-free paper.
Headquarters
Marcel Dekker, Inc.
270 Madison Avenue, New York, NY 10016
tel: 212-696-9000; fax: 212-685-4540
Eastern Hemisphere Distribution
Marcel Dekker AG
Hutgasse 4, Postfach 812, CH-4001 Basel, Switzerland
tel: 41-61-260-6300; fax: 41-61-260-6333
World Wide Web
http://www.dekker.com
The publisher offers discounts on this book whenordered in bulk quantities. For more
information, write to Special Sales/Professional Marketing at the headquarters address
above.
Copyright q 2003 by Marcel Dekker, Inc. All Rights Reserved.
Neither this book nor any part may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, microfilming, and recording, or
by any information storage andretrieval system, without permission in writing from the
publisher.
Current printing (last digit):
10 9 8 7 6 5 4 3 2 1

PRINTED IN THE UNITED STATES OF AMERICA

MECHANICAL ENGINEERING
A Series of Textbooks and Reference Books
Founding Editor

L. L. Faulkner
Columbus Division Battelle Memorial Institute
and Department of Mechanical Engineering
The Ohio State University
Columbus Ohio1 Spring Designer's Handbook, Harold Carlson
2 Computer-Aided Graphics and Design, Daniel L Ryan

3 Lubncation Fundamentals, J George Wills
4

Solar Engmeenng for Domestic Buildings, William A Himmelman

5 Applied Engmeenng Mechanics Statics and Dynamics, G Boothroyd and
C Poh

6 Centnfugal Pump Clinic, Igor J Karassik
7 Computer-Aided Kinetics for Machine Design, Daniel L Ryan
8Plastics Products Design Handbook, Part A Matenals and Components, Part

B Processes and Design for Processes, edited by Edward Miller
9

Turbomachmery Basic Theory and Applications, Earl Logan, Jr

10 Vibrations of Shells and Plates, Wemer Soedel
11 Flat and Corrugated Diaphragm Design Handbook, Mario Di Giovanni
12 Practical Stress Analysis in Engineering Design, Alexander Blake
13 AnIntroduction to the Design and Behavior of Bolted Joints, John H
Bickford
14 Optimal Engmeenng Design Pnnciples and Applications, James N Siddall
15 Spnng Manufacturing Handbook Harold Carlson
16 Industnal Noise Control Fundamentals and Applications, edited by Lewis H

Bell
17 Gears and Their Vibration A Basic Approach to Understanding Gear Noise,
J Derek Smith

18 Chains for PowerTransmission and Material Handling Design and Applications Handbook, American Chain Association
19 Corrosion and Corrosion Protection Handbook, edited by Philip A
Schweitzer
20 Gear Dnve Systems Design and Application, Peter Lynwander
21 Controlling In-Plant Airborne Contaminants Systems Design and Calculations, John D Constance
22 CAD/CAM Systems Planning and Implementation, Charles S Knox

23Probabilistic Engmeenng Design Pnnciples and Applications, James N
Siddall
24

Traction Dnves Selection and Application, Frederick W Heilich III and

Eugene E Shube
25 Finite Element Methods An Introduction, Ronald L Huston and Chris E
Passerello

26. Mechanical Fastening of Plastics: An Engineering Handbook, Brayton Lincoln,
Kenneth J. Gomes, and James F. Braden
27. Lubrication inPractice: Second Edition, edited by W. S. Robertson
28. Principles of Automated Drafting, Daniel L. Ryan
29. Practical Seal Design, edited by Leonard J. Martini
30. Engineering Documentation for CAD/CAM Applications, Charles S. Knox
31. Design Dimensioning with Computer Graphics Applications, Jerome C.
Lange
32. Mechanism Analysis- Simplified Graphical and Analytical Techniques, Lyndon
O....