Repetidor De Señal

Universal WiFi Range Extender WN3000RP Installation Guide

© 2012 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. DO NOT stack equipment, or place equipment in tight spaces or in drawers. Be sureyour equipment is surrounded by at least 2 inches of air space. This product is intended to be sold in the EU and Switzerland.

Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support.netgear.com. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): Seehttp://support.netgear.com/app/answers/detail/a_id/984.

Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are trademarks or registered trademarks of their respective holders. © 2012 NETGEAR, Inc. Allrights reserved.

Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Hardware Features
TheLEDs on the front show how the Extender is working. WPS. The LED indicates a wireless connection. PC to Extender. The LED is lit when the Extender is connected to a PC.

Status. This LED is lit when the Extender is powered on. Link Rate. This LED indicates a wireless connection between the Extender and the router. - Green is best. - Amber is good. - Red is poor. Note: For best performance,position antennas pointing up.

On/Off button WPS button Factory Reset button WPS Ethernet port

PC to Link Rate Extender Status

3

The side panel has the following features: • On/Off button. Turns the device on and off. • WPS button. Press the WPS button to wirelessly connect the Extender to your router or wireless adapter. • Factory Reset button. To use this button, stick a paper clip intothe reset hole and hold it until the Status LED flashes. • Ethernet port. You can connect a computer or other device to this port as described in the User Manual.

4

Getting Started
The WiFi Range Extender extends the wireless network to include the area outside the range of your existing Wi-Fi network. Follow these steps to correctly set up the Extender.

Place the Extender and ApplyPower
1. Place the Extender an equal distance between your router and the wireless device located outside the range of your router.
DO DON’T

Tip: If you have to use a different location, move the Extender closer to the device, but still within the wireless range of the router.

2. Plug the Extender into an electrical outlet, and wait 1 minute until the Extender starts. The Status LED turnsgreen.

5

Connecting the Extender to an Existing Wi-Fi Network
To extend the range of your Wi-Fi network, you will need to connect the Extender to your existing Wi-Fi network. You have two options to connect the Extender to your network. Option 1: Connecting with WPS (Wi-Fi Protected Setup) WPS lets you easily join a secure Wi-Fi network without typing the network name and password. The WPSbutton is a physical button on the Wi-Fi router, gateway, or access point. ), If your router supports WPS (Wi-Fi Protected Setup NETGEAR recommends that you use Option 1; otherwise, go to Option 2.
Tip: WPS does not support WEP network security. If you are using WEP security, use Option 2 to connect.

Option 2: Connecting without WPS, using web browser setup guide The web browser setup guide...