Saber
(24 Port Nway Switch)
[pic]User’s Manual
Table of Contents
Chapter 1 -1-
Console port features overview -1-
Chapter 2 -2-
Hardware installation -2-
Accessories:-2-
Chapter 3 -3-
Software Setting -3-
Open Hyper Terminal -3-
Chapter 4 -7-
The Function of Smart Switch -7-
I. Status -7-
II. Configuration -7-
III.Security -11-
IV. Diagnostics -11-
V. Load Factory Defaults -12-
VI. Save -12-
Console port features overview
[pic] Supports real time statusread/write operation
[pic] Provides on line link status.
[pic] Supports port setting for N-Way or force mode operation
[pic] One port-based Trunk supports the speed up to 800Mbps.
[pic]Supports Load Balancing on Trunking port.
[pic] Optional fiber optic module for 100Base-FX application.
Hardwareinstallation
Accessories:
[pic] One Null model cable
[pic] One D-SUB 9 pin female connector on front panel
[pic] Fiber module (optional)-multimodule/single module (ST or SC type connector)Turn off your PC & Smart Switch powers, and then connect the cable from PC Serial port to Smart Switch D-sub connector.
Note: When you connect the cable from PCSerial port, please remember which serial port you connected. (Please refer to the step 3 of page 4)
Software Setting
Open Hyper Terminal
Follow the steps to open the program.Step 1:
Start ( Programs ( Accessories ( Communications ( HyperTerminal
Step 2:
Enter any name for new connection, and then press OK.Step 3:
Choose serial port that you connect.
Step 4:
Configuration COM port properties.
Bits per second: 19200
Data bits: 8
Parity: None
Stop...
Regístrate para leer el documento completo.