Santillana Segundo Bimestre
Páginas: 3 (692 palabras)
Publicado: 13 de diciembre de 2012
GEnEral PolymErS® FloorS
Revised 01/12
Standard EPoxy PrimEr/ BindEr
Part a Part B GP3579 GP3579B01
GP3579
SerieS Standard Hardener
Product descriPtion
GP3579 Standard PrimEr / BindEris a high solids, clear or pigmented epoxy primer and binder resin. GP3579 STANDARD PRIMER / BINDER is available in clear, red, white and gray, has good blush resistance and is low in viscosity topromote penetration of the concrete substrate and excellent wetting of mortar aggregate. Color: mix ratio:
Product chArActeristics
Clear, Red, Gray, White 2:1 96% ± 2%, mixed 96% ± 2%, mixedVolume Solids: Weight Solids:
VoC (EPa method 24): 230°F (>110°C), ASTM D 93, mixed
PerformAnce chArActeristics
test name test method results
adhesion Compressive Strength FlammabilityFlexural Strength Hardness, Shore d tensile Strength
ACI 503R ASTM D 695
300 psi concrete failure 9,000 psi Self-extinguishing over concrete 6,000 psi 75/65 3,000 psi
• •
ASTM D 790ASTM D 2240 ASTM D 638
surfAce PrePArAtion
Proper inspection and preparation of the substrate to receive resinous material is critical. Read and follow the “Instructions for Concrete SurfacePreparation” (Form G-1) for complete details.
continued on back
y
GEnEral PolymErS® FloorS
APPlicAtion
• aPPliCation inStrUCtionS
Standard EPoxy PrimEr/ BindEr
Part a Part B GP3579 GP3579B01SerieS Standard Hardener
GP3579
S
Product information
cleAnuP
Clean up mixing and application equipment immediately after use. Use toluene or xylene. Observe all fire and health precau1.Add 2 parts 3579A (resin) to 1 part 3579B (hardener) by volume. tions when handling or storing solvents. Mix with low speed drill and Jiffy blade for three minutes and until uniform. To insureproper system cure and performance, strictly sAfety follow mix ratio recommendations. Refer to the MSDS sheet before use. 2. 3579 may be applied via spray, roller or brush. Apply evenly, with no...
Revised 01/12
Standard EPoxy PrimEr/ BindEr
Part a Part B GP3579 GP3579B01
GP3579
SerieS Standard Hardener
Product descriPtion
GP3579 Standard PrimEr / BindEris a high solids, clear or pigmented epoxy primer and binder resin. GP3579 STANDARD PRIMER / BINDER is available in clear, red, white and gray, has good blush resistance and is low in viscosity topromote penetration of the concrete substrate and excellent wetting of mortar aggregate. Color: mix ratio:
Product chArActeristics
Clear, Red, Gray, White 2:1 96% ± 2%, mixed 96% ± 2%, mixedVolume Solids: Weight Solids:
VoC (EPa method 24): 230°F (>110°C), ASTM D 93, mixed
PerformAnce chArActeristics
test name test method results
adhesion Compressive Strength FlammabilityFlexural Strength Hardness, Shore d tensile Strength
ACI 503R ASTM D 695
300 psi concrete failure 9,000 psi Self-extinguishing over concrete 6,000 psi 75/65 3,000 psi
• •
ASTM D 790ASTM D 2240 ASTM D 638
surfAce PrePArAtion
Proper inspection and preparation of the substrate to receive resinous material is critical. Read and follow the “Instructions for Concrete SurfacePreparation” (Form G-1) for complete details.
continued on back
y
GEnEral PolymErS® FloorS
APPlicAtion
• aPPliCation inStrUCtionS
Standard EPoxy PrimEr/ BindEr
Part a Part B GP3579 GP3579B01SerieS Standard Hardener
GP3579
S
Product information
cleAnuP
Clean up mixing and application equipment immediately after use. Use toluene or xylene. Observe all fire and health precau1.Add 2 parts 3579A (resin) to 1 part 3579B (hardener) by volume. tions when handling or storing solvents. Mix with low speed drill and Jiffy blade for three minutes and until uniform. To insureproper system cure and performance, strictly sAfety follow mix ratio recommendations. Refer to the MSDS sheet before use. 2. 3579 may be applied via spray, roller or brush. Apply evenly, with no...
Leer documento completo
Regístrate para leer el documento completo.