Setup Camaras Ip

MJPEG INDOOR SERIES
WiFi indoor IP Camera

B E F OR E Y OU B E GIN
Please unpack the box carefully and identify that all the parts are present. The Camera is suitable for indoor use. Check the voltage of the power supply. Make sure you use the recommended power input (5.0V DC, 1.5A). Use of incorrect voltage is not covered by the warranty. Do not attempt to open the casing to access theCamera. Damage caused to the product by tampering with the casing is not covered by the warranty. Do not aim the camera at the sun or similar intense light. The interval time of powering the camera on and off must be more than 10 seconds otherwise it will cause serious damage to the CPU. When you update the cameras, please ensure you: - connect the camera directly to a computer using a network cable -close other programs and windows on the computer - keep the power connected when updating the firmware

PR OD U C T D E S C R I P T IO N
WiFi Pan Tilt Camera can be set up in minutes for instant monitoring and live viewing on your Mac or Windows computer and 3G Smartphone - all via your wireless network router or switch For optional recording, simply install the recording software to yourWindows PC and configure it to your particular requirements.

FEATURES
Camera combines a high quality digital charge-coupled device (COMS) with a powerful wireless web server for clear images from anywhere on your local network or over the internet. Can be used on WiFi or Wired Networks. Dual resolution, 640x480 or 320x240 pixel resolution. Expand the system at any time by adding up to 35additional cameras. View cameras in Split Screen view or watch the camera detecting movement full screen. Cameras can be viewed via standard PC or Mac browsers including Internet Explorer, Safari, Chrome and Firefox. IR LEDs for up to 12m Night Vision. NOTES ON WINDOWS AND MAC COMPATIBILITY: - IP camera setup should be completed on a Windows PC only using Internet Explorer. - Live viewing, takingsnapshots, recording and camera configuration are fully supported on Windows PCs. Mac users are only able to: - view live images via compatible web browsers including Safari, Firefox and Chrome but are limited to viewing one camera at a time. - take and save snapshot images via the web browser interface. Cameras can be mounted indoors. Includes Multi-level user management which can be configured withsecure password access. Easy to use web browser controls. Also allows quick configuration changes via the Settings menu. View live images on your 3G Smartphone. Supports image snapshots and image sending via Email and FTP upload. Supplied with free 36 Camera Windows Recording and Viewing software.

P A C K A G E C ONT E N T S

WiFi Camera with Antenna

Power Adaptor

Bracket

Screws and WallPlugs

Software Installation CD

C A M E R A I N S T A L L AT ION
1. Begin by screwing the antenna and bracket to the camera and power the camera using the power supply provided. 2. Using a standard Ethernet network cable, connect the camera to your wireless network. The camera can either be connected to a router/switch or directly to a PC with an Ethernet network cable. We recommend yousetup the camera initially on your network using a wired connection before it is used wirelessly. 3. Continue with setup (read the next chapter) and once the camera has been successfully setup on your network, it can be mounted on a wall using the wall plugs and screws provided. (Camera setup is designed for Windows PCs only).

CA M E R A S E T U P co n t i n u e d
Please note that if you areusing the camera on a wireless network you will need to first configure the camera for wired use, before you programme your wireless settings in to it. 1. Insert the Installation CD into your PC CD drive and the installation screen should appear automatically. If it does not, click ‘Start > Run> Browse...’ to locate the CD on your computer . 2. Double click ‘IPCamSetup.exe’ and install the software...