Simulacion estetica

ANSYS Report - Project

Página 1 de 11

Project
Author Sebastian Alfonso _ Fernando Sierra Project Created Thursday, May 17, 2007 at 3:08:37 PM Project Last Modified Thursday, May 17, 2007 at 3:46:16 PM Report Created Thursday, May 17, 2007 at 3:56:19 PM Software Used ANSYS 10.0 Database C:\Documents and Settings\Administrador\Escritorio\Fernado Sierra_Sebastian Alfonso\SimulacionAnsys\ROBOT KR500I340_1ESTATICO.dsdb

file://C:\Documents and Settings\Administrador\Datos de programa\Ansys\v100\DSRepo... 17/05/2007

ANSYS Report - Project

Página 2 de 11

1. Summary
This report documents design and analysis information created and maintained using the ANSYS® engineering software program. Each scenario listed below represents one complete engineering simulation. Scenario 1Based on the Parasolid® assembly "C:\Documents and Settings\Administrador\Escritorio\ROBOT KR500I340_1ESTATICO.x_t". Considered the effect of body-to-body contact, acceleration, structural loads and structural supports. Calculated structural results. No convergence criteria defined. No alert criteria defined. See Scenario 1 below for supporting details and Appendix A1 for corresponding figures.file://C:\Documents and Settings\Administrador\Datos de programa\Ansys\v100\DSRepo... 17/05/2007

ANSYS Report - Project

Página 3 de 11

2. Introduction
The ANSYS CAE (Computer-Aided Engineering) software program was used in conjunction with 3D CAD (Computer-Aided Design) solid geometry to simulate the behavior of mechanical bodies under thermal/structural loading conditions. ANSYSautomated FEA (Finite Element Analysis) technologies from ANSYS, Inc. to generate the results listed in this report. Each scenario presented below represents one complete engineering simulation. The definition of a simulation includes known factors about a design such as material properties per body, contact behavior between bodies (in an assembly), and types and magnitudes of loading conditions. Theresults of a simulation provide insight into how the bodies may perform and how the design might be improved. Multiple scenarios allow comparison of results given different loading conditions, materials or geometric configurations. Convergence and alert criteria may be defined for any of the results and can serve as guides for evaluating the quality of calculated results and the acceptability ofvalues in the context of known design requirements. Solution history provides a means of assessing the quality of results by examining how values change during successive iterations of solution refinement. Convergence criteria sets a specific limit on the allowable change in a result between iterations. A result meeting this criteria is said to be "converged". Alert criteria define "allowable" rangesfor result values. Alert ranges typically represent known aspects of the design specification. All values are presented in the "SI Metric (m, kg, N, °C, s, V, A)" unit system. Notice Do not accept or reject a design based solely on the data presented in this report. Evaluate designs by considering this information in conjunction with experimental test data and the practical experience of designengineers and analysts. A quality approach to engineering design usually mandates physical testing as the final means of validating structural integrity to a measured precision.

file://C:\Documents and Settings\Administrador\Datos de programa\Ansys\v100\DSRepo... 17/05/2007

ANSYS Report - Project

Página 4 de 11

3. Scenario 1
3.1. "Model"
"Model" obtains geometry from the Parasolid®assembly "C:\Documents and Settings\Administrador\Escritorio\ROBOT KR500I340_1ESTATICO.x_t". The bounding box for all positioned bodies in the model measures 1.18 by 3.69 by 2.55 m along the global x, y and z axes, respectively. The model has a total mass of 2,616.84 kg. The model has a total volume of 0.33 m³. Table 3.1.1. Bodies Name "kr500l340_3" "kr500l340_6" "kr500l340_2" "kr500l340_28"...