Simulador De Plc Siemens
Páginas: 69 (17168 palabras)
Publicado: 17 de enero de 2013
S7-PLCSIM V5.4
1 ___________________ Introduction 2 ___________________ Product overview
SIMATIC Engineering Tools S7-PLCSIM V5.4
Operating Manual
3 ___________________ Getting Started 4 ___________________ Simulation Tasks 5 ___________________ View objects 6 ___________________ Error and Interrupt OBs 7 ___________________ Reference information
07/2011
A5E00992424-03 Legal information Legal information Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are gradedaccording to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken. CAUTION without a safety alertsymbol, indicates that property damage can result if proper precautions are not taken. NOTICE indicates that an unintended result or situation can occur if the relevant information is not taken into account. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol mayalso include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable ofidentifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Propertransport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in thispublication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication isreviewed regularly and any necessary corrections are included in subsequent editions.
Siemens AG Industry Sector Postfach 48 48 90026 NÜRNBERG GERMANY
A5E00992424-03 Ⓟ 05/2011
Copyright © Siemens AG 2011. Technical data subject to change
Table of contents
1 2Introduction................................................................................................................................................ 7 Product overview ....................................................................................................................................... 9 2.1 2.2 2.3 2.4 2.5 2.5.1 2.5.2 2.5.3 3 3.1 3.2 3.3 3.3.1 3.3.2 3.4 3.5 3.6 3.7 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12
S7-PLCSIM V5.4 Operating Manual, 07/2011, A5E00992424-03
Functional...
1 ___________________ Introduction 2 ___________________ Product overview
SIMATIC Engineering Tools S7-PLCSIM V5.4
Operating Manual
3 ___________________ Getting Started 4 ___________________ Simulation Tasks 5 ___________________ View objects 6 ___________________ Error and Interrupt OBs 7 ___________________ Reference information
07/2011
A5E00992424-03 Legal information Legal information Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are gradedaccording to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken. CAUTION without a safety alertsymbol, indicates that property damage can result if proper precautions are not taken. NOTICE indicates that an unintended result or situation can occur if the relevant information is not taken into account. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol mayalso include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable ofidentifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Propertransport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in thispublication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication isreviewed regularly and any necessary corrections are included in subsequent editions.
Siemens AG Industry Sector Postfach 48 48 90026 NÜRNBERG GERMANY
A5E00992424-03 Ⓟ 05/2011
Copyright © Siemens AG 2011. Technical data subject to change
Table of contents
1 2Introduction................................................................................................................................................ 7 Product overview ....................................................................................................................................... 9 2.1 2.2 2.3 2.4 2.5 2.5.1 2.5.2 2.5.3 3 3.1 3.2 3.3 3.3.1 3.3.2 3.4 3.5 3.6 3.7 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12
S7-PLCSIM V5.4 Operating Manual, 07/2011, A5E00992424-03
Functional...
Leer documento completo
Regístrate para leer el documento completo.