sjv dlkfv ewkjnwedlk ñ_ñ
Páginas: 2 (443 palabras)
Publicado: 8 de abril de 2014
TRANSMITTER FISHER
CONDUCTIVE TRACE CONDENSED INSTRUCTIONS
1.-Read instruction manual before operating.
2.-Plug ground plate cable into transmitter ground plate clamp to pipe.
3.- PositionTransmitter as far from pipe as possible and insert GROUND PLATE into earth as far from Transmitter as possible lay Ground plate on pavement.
4.-Pull out to power swicht.
5.-The receiver is operatedthe same as inductive operation without handle.
RECEIVER
NARROW SCAN INDUCTIVE SEARCH CONDENSED INSTRUCTIONS.
1.-Read instruction manual before operating Keep GEMINI 3 at least15 feet from autos, fences & other large metallic objects during tuning.
2.-Attach handle Turn BALANCE Knob (with arrow) at least 10 turns to compress spring All other knobs should be light.3.-Pull transmitter POWER switch on.
4.-Pull receiver POWER switch on. Set SENSITIVITY at 7.
5.-A full scale meter reading and loud tone will result with GEMINI 3 held at arm´s length,paralleil to theground.
6.Turn BALANCE knob counter clockwise until you get a sharp null in sound and meter reading if null is not present or less than 1/8 turn wide reduce SENSITIVITY if null is more than ¼ turnwideincrease SENSITIVITY.
7.-To pinpoint target cross target from each side and mark ground at the strongest signal point of each crossing.The target will be between the two marks.
Manual deinstrucciones
1.-Leer antes de operar. Cable de la placa
2.-Plug tierra en la placa de tierra del transmisor abrazadera para tubería.
3 -. Transmisor de posición en la medida de lo posible de la tubería einsertar placa de tierra en tierra, en la medida de lo posible transmisor ponen Placa de tierra sobre el pavimento.
4.-Sacar a swicht poder.
5.-El receptor se hace funcionar el mismo que laoperación inductiva sin mango.
REDUCIR SCAN INDUCTIVOS BUSCAR INSTRUCCIONES condensada. Manual de instrucciones
1.-Leer antes de operar Mantenga GEMINI 3 por lo menos 15 pies de...
CONDUCTIVE TRACE CONDENSED INSTRUCTIONS
1.-Read instruction manual before operating.
2.-Plug ground plate cable into transmitter ground plate clamp to pipe.
3.- PositionTransmitter as far from pipe as possible and insert GROUND PLATE into earth as far from Transmitter as possible lay Ground plate on pavement.
4.-Pull out to power swicht.
5.-The receiver is operatedthe same as inductive operation without handle.
RECEIVER
NARROW SCAN INDUCTIVE SEARCH CONDENSED INSTRUCTIONS.
1.-Read instruction manual before operating Keep GEMINI 3 at least15 feet from autos, fences & other large metallic objects during tuning.
2.-Attach handle Turn BALANCE Knob (with arrow) at least 10 turns to compress spring All other knobs should be light.3.-Pull transmitter POWER switch on.
4.-Pull receiver POWER switch on. Set SENSITIVITY at 7.
5.-A full scale meter reading and loud tone will result with GEMINI 3 held at arm´s length,paralleil to theground.
6.Turn BALANCE knob counter clockwise until you get a sharp null in sound and meter reading if null is not present or less than 1/8 turn wide reduce SENSITIVITY if null is more than ¼ turnwideincrease SENSITIVITY.
7.-To pinpoint target cross target from each side and mark ground at the strongest signal point of each crossing.The target will be between the two marks.
Manual deinstrucciones
1.-Leer antes de operar. Cable de la placa
2.-Plug tierra en la placa de tierra del transmisor abrazadera para tubería.
3 -. Transmisor de posición en la medida de lo posible de la tubería einsertar placa de tierra en tierra, en la medida de lo posible transmisor ponen Placa de tierra sobre el pavimento.
4.-Sacar a swicht poder.
5.-El receptor se hace funcionar el mismo que laoperación inductiva sin mango.
REDUCIR SCAN INDUCTIVOS BUSCAR INSTRUCCIONES condensada. Manual de instrucciones
1.-Leer antes de operar Mantenga GEMINI 3 por lo menos 15 pies de...
Leer documento completo
Regístrate para leer el documento completo.