Sonido Profesional
2-Way Trapezoidal 15" Reflex Enclosure Project
T
he ‘Fane Constructor Series’ of documents is intended to provide guidance in the construction of loudspeaker cabinets specifically optimised for Fane components. Each enclosure has been designed and rigorously tested to ensure optimum performance from the recommended components. The construction guide and panel cuttinglists
provide sufficient information to enable any moderately experienced woodworker to build their own enclosures. Alternatively, Fane Acoustics will be pleased to recommend approved cabinet manufacturers. Designs for other enclosures and drive unit combinations are available on request.
Cabinet Design for: • Colossus 15B-600 OR • Colossus 15B • CD.280 • FH.2450 • Fane Crossover
Technicaldata
Low Frequency Unit High Frequency Unit High Frequency Horn Crossover Unit
System Components Colossus 15B-600 CD.280 FH.2450 Constructor-X2 Predicted Performance 45 Hz – 18kHz (+/- 3dB) 8Ω 99dB 600Watts (AES) 123/129dB
Colossus 15B CD.280 FH.2450 Constructor-X2
Frequency Response Impedance Average Sensitivity 1W/1M Power Handling Maximum Output: Continuous/Peak
45 Hz – 18kHz (+/-3dB) 8Ω 98dB 400Watts (AES) 121/127dB
Fane Acoustics Ltd. Unit 1, Millshaw Park Avenue Millshaw Park Industrial Estate Leeds LS11 0LR, England Tel: +44 (0) 113 277 8600 Fax: +44 (0) 113 277 8700 e-mail:info@fane-acoustics.com www.fane-acoustics.com
CONSTRUCTOR SERIES: 2-Way Trapezoidal 15" Reflex Enclosure
All dimensions are in millimetres
Front View
400 X 45 4 HOLES 8.0 DIAM ON393.7 PCD 743 205 Y Y 779
Section X-X
205
Ø352.0
274 74 X 342 482
274 PORT DIAM 102 PORT LENGTH 65
Section Y-Y
543 18 18 10
482 418 75°
285
Panel cutting guide
250
INTERNAL BRACE QTY 1
418 285
743
SIDE PANEL QTY 2
743
BACK PANEL QTY 1
743
FRONT BAFFLE QTY 1
482
TOP + BOTTOM PANEL QTY 2
543
490 15° 15° 15°
295
491
15°
15°15°
Fane Acoustics Ltd. operates a policy of continuous product development and reserves the right to change specifications without notice.
Fane Acoustics Ltd. Unit 1, Millshaw Park Avenue Millshaw Park Industrial Estate Leeds LS11 0LR, England Tel: +44 (0) 113 277 8600 Fax: +44 (0) 113 277 8700 e-mail:info@fane-acoustics.com www.fane-acoustics.com
CONSTRUCTOR SERIES: 2-Way Trapezoidal 15"Reflex Enclosure
Hints and Tips
Choice of timber
We recommend multi-layer 18mm Birch plywood as the best material to withstand the rigours of intensive ‘life on the road’ or likely exposure to damp conditions. Alternatively, 18mm Medium Density Fibreboard (MDF) offers good acoustic properties with the advantage of being less expensive ( although heavier ), and may be used where the cabinet willbe permanently installed in a dry environment. Both materials accept any type of paint finish extremely well.
Drive unit fixing
The drive unit should be front mounted to the baffle using T-nuts and fixing bolts, and is supplied with a length of self adhesive foam sealing strip which should be fitted around the front edge of the speaker cut-outs to guarantee airtight conditions.
Loudspeakerprotection
The exposed front of all speaker drive units is of course vulnerable to damage, necessitating some means of protection which must be robust but acoustically transparent. Cloth/foam type grilles are feasible for fixed cabinets, but a metal mesh grille is certainly the preferred and superior option. It is recommended that a foam gasket material is used between the wooden cabinet and themetal grille to prevent any unwanted resonances.
Construction technique
All joints should be totally airtight, liberally glued with PVA adhesive and screwed at 200mm (8”) centres with 4.2mm or 4.8mm (No.8 or No.10) x 50 mm (2”) self-tapping screws. The bracing panels are designed to ensure rigidity of construction, making the cabinet as free as possible from panel resonances caused by the...
Regístrate para leer el documento completo.