Tecnologia

QUESTION NO: 1 IBM ToolsCenter Bootable Media Creator is used to create bootable media. Which of the following functions can be performed with this tool? A. Update firmware, update drivers, install Windows, report energy usage B. Update firmware, run diagnostics, install Windows, report energy usage C. Update firmware, update drivers, run diagnostics, install Windows D. Update firmware, updatedrivers, run diagnostics, install Windows and Linux Answer: C Explanation:

QUESTION NO: 2 A customer asks for financial justification for the System x solution. Which resource can provide the customer requirements A. Alinean B. Techline C. CDAT D. SSCT Answer: A Explanation:

QUESTION NO: 3 A BladeCenter customer talks about UCS as a superior solution to their HS22 installation. Which of thefollowing is the competitor and a likely claim? A. HP is going to stress easy cloud deployment B. Dell is going to stress low purchase cost C. Vblock is going to stress storage integration D. Cisco is going to claim a completely unified system solution Answer: D Explanation:

QUESTION NO: 4 An HP customer has is looking at IBM System x3850 eX5 servers, comparing them to the new HP DL580. Which ofthe following is a typical differentiator favoring the x3850? A. Maximimum memory B. Processor speed C. Intergrated quad port 1Gb Ethernet D. More I/O slots available Answer: A Explanation:

QUESTION NO: 5 A customer has fully populated all the storage drive bays on an installed server. The customer plans to add new storage and share storage with three other servers. Which of the followingmeets these requirements? A. Replace current storage with solid state storage B. Add external storage via SAN C. Add external storage via EXP2512 D. Replace current storage with more dense drives Answer: B Explanation:

QUESTION NO: 6 A customer recently purchased an HS23 blade to install into their existing BladeCenter H chassis. The customer installed the blade and it was not recognized. Which ofthe following is the first question for this customer? A. What is the processor wattage? B. Is the AMM firmware up to date? C. Did they add the redundant AMM? D. Is the HS23 memory configuration optimized? Answer: B Explanation:

QUESTION NO: 7 A customer needs to get a working Windows 2008 image with drivers for their new servers as soon as possible. Which of the following method would bestachieve this? A. Use ServerGuide to install Windows 2008 B. Install Windows 2008 using the F6 supply Mass Storage Controller option C. Deploy Customer existing image and use UXSPi to update IBM specific driversDeploy Customer? existing image and use UXSPi to update IBM specific drivers D. Replace Customer deployment solution with Tivoli Provisioning Manager for OS Deployment Director EditionReplaceCustomer? deployment solution with Tivoli Provisioning Manager for OS Deployment Director Edition Answer: A Explanation:

QUESTION NO: 8 Which of the following System x products requires a TDA? A. x3850 X5 B. DS3500 C. EXP2500 D. x3690 eX5 Answer: A Explanation:

QUESTION NO: 9 A customer is asking if the new IBM UEFI recognizes their Windows 2003 Enterprise Operating System. Which of thefollowing is the correct answer? A. UEFI can support Windows 2003 Enterprise in native mode B. An upgrade must be done to Windows 2008 Enterprise x64 C. UEFI only supports Windows 2003 as a virtual machine guest (VMware or Hyper-V) D. UEFI can emulate BIOS and support Windows 2003 with no performance impact

Answer: D Explanation:

QUESTION NO: 10 After putting together a configuration that meetscustomer requirements, a TDA is suggested. The customer is not familiar with the TDA processAfter putting together a configuration that meets customer? requirements, a TDA is suggested. The customer is not familiar with the TDA process and asks why this should be done. Which of the following is the benefit of a TDA? A. A TDA brings an IBM technician onsite to properly inspect and installed...