Temas Variados

Ensure it is safe for the drive and motor to be energized.
1. Apply main power.
2. The Main Screen Appears after several seconds (Fig 1.). If a message appears requesting language selection,press ACT to stop this request. (Fig. 1).
3. Press the PAR button (Fig. 1) to go to parameter screens. (Fig.2)
4. Ensure that you have an “L” on the top line of the screen signifying localoperation. If the “L” is not there, press the Local / Remote Button. (Fig.2)
5. Use the double arrow buttons to select Parameter Group 99 indicated on the Parameter Screen.(Fig.2)
6. Use theSingle Arrow Buttons to select Parameter Number 04, MOTOR CNTRL MODE. .(Fig.2)
7. Press Enter (brackets appear around the Selection). (Fig. 2)
8. Use the Single Arrow Buttons to scroll to [DTC]9. Press Enter (brackets disappear)
10. Use the double arrow buttons to select Parameter Group 20, LIMITS indicated on the Parameter Screen.(Fig.2)
11. Use the Single Arrow Buttons to selectParameter Number 02, MAXIMUM .(Fig.2)
12. Press Enter (brackets appear around the Selection). (Fig. 2)
13. Use the Single Arrow Buttons to scroll to [3600 RPM] ( according to the name plate).14. Press Enter (brackets disappear)
15. Use the Single Arrow Buttons to select Parameter Number 01, MINIMUM .(Fig.2)
16. Press Enter (brackets appear around the Selection). (Fig. 2)
17. Usethe Single Arrow Buttons to scroll to 3600 RPM]
(according to the name plate)
18. Press Enter (brackets disappear)
19. Use the double arrow buttons to select Parameter Group 22, ACCEL/DECELindicated on the Parameter Screen.(Fig.2)
20. Use the Single Arrow Buttons to select Parameter Number 02, ACCEL TIME 1 .(Fig.2)
21. Press Enter (brackets appear around the Selection). (Fig. 2)22. Use the Single Arrow Buttons to scroll to [10 SEC]
23. Press Enter (brackets disappear)
24. Use the double arrow buttons to return to Parameter Group 99 indicated on the Parameter...