Test
IP Proprietary Telephone
Model No. KX-NT321
Thank you for purchasing an IP Proprietary Telephone (IP-PT). Please read this manual carefully before using this product and save this manual for future use. For more details, please refer to the manuals of the PBX. Accessories (included)
Handset Handset Cord Wall Mounting Adaptor
One Screws Stand
One
One
TwoOne
This model supports the following PBX versions and CODEC types:
KX-TDA50: PSMPR Software File Version 4.0000 or later KX-TDA100/KX-TDA200: PMPR Software File Version 5.0000 or later KX-TDA600: PLMPR Software File Version 5.0000 or later KX-TDE100/KX-TDE200: PMMPR Software File Version 1.0000 or later CODEC: G.729A, G.711, G.722 *1
*1
G.722 is only available for KX-TDE100/KX-TDE200.Document Version 2008-05
Location of Controls
Controls Location of
A B C D E F G
P
O
N
H
I
J
K
L M
2
Document Version 2008-05
Location of Controls
A LCD (Liquid Crystal Display) B AUTO DIAL/STORE: Used for System/Personal Speed Dialing or storing program changes. C AUTO ANS (Auto Answer)/ MUTE: Used to receive an incoming call in hands-free mode or mutethe microphone/handset during a conversation. D INTERCOM: Used to make or receive intercom calls. E MESSAGE: Used to leave a message waiting indication or call back the party who left the message waiting indication. F REDIAL: Used to redial the last dialed number. G TRANSFER: Used to transfer a call to another party. H Headset Jack I FLASH/RECALL: Used to disconnect the current call and makeanother call without hanging up. J HOLD: Used to place a call on hold. K SP-PHONE (Speakerphone): Used for performing hands-free operations. L Navigator Key: Used to adjust the volume and the display contrast or select desired items. M Microphone: Used for hands-free conversations. N Flexible CO Buttons: Used to seize a CO line or perform a feature that has been assigned to the key. O PROGRAM: Used toenter and exit the personal programming mode. P Message/Ringer Lamp: When you receive an intercom call, the lamp flashes green, and on an outside call, the lamp flashes red. When someone has left you a message, the lamp stays on red.
Document Version 2008-05
3
Settings
Settings
Speaker volume While in a hands-free conversation Handset/Headset While using the handset or headsetvolume*1 Ringer volume LCD Contrast While on-hook
PROGRAM AUTO DIAL STORE AUTO DIAL STORE PROGRAM
Press Up to increase While on-hook or receiving a call or Down to decrease the volume.
Ring Tone
(CO) PROGRAM OR INTERCOM Press 2 times.
*2
AUTO DIAL PROGRAM STORE
LCD Backlight While on-hook
Automatic PROGRAM AUTO DIAL Always ON STORE Always OFF AUTO DIAL STORE
*1 *2
PROGRAM
If youhear your own voice through the handset or headset, decrease the volume. The ring tone pattern of patterns 09 to 30 is the same as pattern 01.
4
Document Version 2008-05
Features List
Features List
Icon Meanings
(CO)
= Flexible CO button = Feature number
= Off-hook = Talk
C. Tone
= On-hook = Confirmation Tone
Making Calls
Calling To an extension
extension no.
To anoutside party
(CO) outside phone no.
Redial
REDIAL
Quick Dialing
quick dial no.
One-touch Dialing To store
PROGRAM (CO) desired no.* (max. 32 digits) AUTO DIAL PROGRAM
STORE * Enter CO line access number before outside phone number.
To dial
assigned as a (One-touch One-touch Dialing Dialing) button
Document Version 2008-05
5
Features List
Personal Speed Dialing Tostore
personal speed dial no. (2 digits) C. Tone * Enter CO line access number before outside phone number. desired no.* (max. 32 digits)
To dial
AUTO DIAL personal speed dial no. (2 digits) STORE
System Speed Dialing To dial
AUTO DIAL system speed dial no. (3 digits) STORE
Doorphone Call
doorphone no. (2 digits) C. Tone
During a Conversation
Call Hold To hold
HOLD C. Tone (CO)...
Regístrate para leer el documento completo.