Texto

CP TD1
Reference Manual
HIGH-PRECISION TEST SYSTEM FOR ON-SITE INSULATION TESTS OF HIGH-VOLTAGE SYSTEMS Accessories included

CP TD1 Reference Manual

Article Number VESD0606 - Manual Version: CPC100TD1.AE.4 With regard to the functionality of the CPC 100 software, the CPC Explorer and the CPC Editor, this manual refers to the version V 1.4. © OMICRON electronics 2007 This manual is apublication of OMICRON electronics GmbH. All rights including translation reserved. Reproduction of any kind, e.g., photocopying, microfilming, optical character recognition and/or storage in electronic data processing systems, requires the explicit consent of OMICRON electronics. Reprinting, wholly or in part, is not permitted. The product information, specifications, and technical data embodied inthis manual represent the technical status at the time of writing and are subject to change without prior notice. We have done our best to ensure that the information given in this manual is useful, accurate and entirely reliable. However, OMICRON electronics does not assume responsibility for any inaccuracies which may be present. The user is responsible for every application that makes use of anOMICRON product. OMICRON electronics translates this manual from the source language English into a number of other languages. Any translation of this manual is done for local requirements, and in the event of a dispute between the English and a non-English version, the English version of this manual shall govern.

2

Contents

Contents
Safety Instructions. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Handling Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Static Charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 9

1

CP TD1 Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
1.1 1.2 Designated Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Functional Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.2.1 1.2.2 Setup of Devices withTrolley. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Setup of Devices without Trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12

CP TD1 Connected to a Power Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 CP TD1 Connected to CP CAL1 . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 15 Putting CP TD1 into Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Calibrating CP TD1 Using a Reference Capacitor. . . . . . . . . . . . . . . . . . . . . . . 17 TanDelta Test Card - Main Page (1/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 TanDelta Test Card - Main Page (2/2) . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 21 TanDelta Test Card - Settings Page (1/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 TanDelta Test Card - Settings Page (2/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Technical Data of CP TD1 inCombination with CPC 100 . . . . . . . . . . . . . . . . . 25
1.12.1 1.12.2 1.12.3 1.13.1 1.13.2 High Voltage Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Mechanical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....