Torno Electrico (Trabajo De Ingles)

Informe

Tema: Torno

Titulo: maquinas herramientas

Profesor:

Alumno: Quiroga Didier, Abad Daiana

Curso: 1 A

Escuela: Industrial N°2

Índex
Informe…………………………………………………………………...…..…………Pag N°1

Index…………………………………………….………………………………..………Pag N°2

Development……………………………………………………………….…………Pag N°3

Parties around……………………………………………………………………..…Pag N°4,5

Typesaround…………………………………………………………………...……Pag N°6,7

Blade Type……………………………………………………….……………….....…Pag N°7

Conclusion………………………………………………………………………..……Pag N°8

Development

They called around a set of machines and machine tools for geometric form.
These machine tools operate by rotating the work piece (subject to the spindle or fixed between the centering points) while one or more cutting tools are driven in a regulated movement forward against thesurface of the work piece, cutting chip under conditions suitable machining technology.
The cutting tool is mounted on a carriage which moves on guides or rails parallel to the axis of rotation of the work piece that is machined, called the Z axis, this is another car that moves along the X axis in a radial direction the part is machined, and there may be a third car called chariot that can betilted to make cones, and which supports the tool turret.
When the main carriage moves the tool along the axis of rotation, produces the turning of the work piece, and when the cross slide moves perpendicular to the axis of symmetry of the piece is performed called capping operation.

Parties around

Bench: It is the surface and the backbone of a lathe. Its rigidity and alignment affect theaccuracy of the lathe machined parts

Head: It is fixed on the left side of the lathe bed and he will usually mounted bodies transmitting motion to the shaft of the motor.

The Counterpoint: Used to support the other end of the workpiece during machining, or to support various cutting tools, such as drills, reamers and taps.

Home Shopping: Is also called longitudinal carriage. This slides onthe upper guides of the bedplate.

The Apron: The part of the car that gives down, facing the operator. Contains the gears and clutches which transmit forward movement of the screw and rod pattern of longitudinal and transverse carriage surfacing.

Cross slide: It moves perpendicular to the axis of the lathe by hand, turning the cross feed crank or lever clutching automatic cross feed.Auxiliary carriage: Va mounted on the cross slide and can be rotated to any angle from horizontal to the axis lathe for machining bevel and cones.

The burin or cutting tool on the turret is attached to the tool that is located on the auxiliary carriage.

The tool turret: Located on the trolley to mount various tools in the same machining operation and turn it to determine the angle of incidence onthe material.

The Norton Safe: For quick change of speed, is the binding element that transmits power between the spindle and the carriage. By operating the gear shift levers of this case can be selected in various different configurations advances connecting the gears to the movement transmission belt.

Types around

Lathe: The mechanical lathe or lathe is the type that evolved based onancient lathes when incorporating new facilities that were able to make it one of the most important machine tools have existed.
At present this type of lathe is used to perform minor tasks, for use in workshops and apprentices maintenance workshops for specific jobs or special.
 Copying lathe: It's called a copying lathe lathe type operating with hydraulic and electronic device allows turningparts according to the characteristics of the same following the outline of a template that plays like a replica to the guide. Such lathes used for turning those parts having different diameters steps that have been previously forged or cast and have little excess material.
Lathe: The turret lathe is a variety of lathe designed for machining parts on possible the...