Toyota Starlet

TOYOTA STARLET EP82
Wiring connections, Connector IDs & Loom Layouts
Rev 1.2 – Last Updated October 2011
Author & Copyright : Alan Mears © Location : Perth, Western Australia Contact Email : alan@mearcat.com.au Online Forums User Name : Mearcat

This document details a large amount of wiring information which I could ascertain from the two main wiring looms (Cabin & Engine Bay) that wasprovided with a 1991 (Gen 1) EP82 Toyota Starlet GT (4E-FTE) front cut, however much of the wiring layout and information will be appropriate to later Toyota Starlet models (with eg slightly different connectors or wiring colours). Please note that there are no specific details of wiring connections and connectors in the doors, nor rear wiring loom of the car - due to those parts of the car notincluded with the front cut. The front cut was a Manual Transmission 4E-FTE which was not fitted with TEMS or ABS, so no specific details of those components could be provided. To advise of any corrections, please contact me on the above email address.

Table of Contents
Page 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Contents Wiring Loom Layout (To Scale) Connector ID Quick Reference TableConnectors 1-15 (Cabin Loom) Connectors 16-30 (Cabin Loom) Connectors 31-42 (Cabin Loom) Connectors 43-57 (Engine Bay Loom) Connectors 58-72 (Engine Bay Loom) Connectors 73-90 (Engine Bay Loom) Connectors 91-97 (Engine Bay Loom) Connector Pinouts & Conduction Details Relay, Fuse & Temperature Sensor IDs Relay Connection & Pin Details Instrument Cluster Connections & PCB Tracks Instrument Cluster WiringDiagram ECU Pinout Details ECU Wiring Diagram Power & Switch Wiring Diagram A/C Condenser & Radiator Fan Relay Configurations

Page 1 of 19

87 86

90 88

91 89 67

93

94 96 97 G Drivers Side

Passengers Side G 83 84 Fuse & Relay Box 54 85 Batt 63 55 56 57
A/C Relays

72 71 69 70 92 82 95 80 81

66 65 68

Box above inlet manifold

58

73

74

77

75

76

7953

Diag.

59 78 60 61 62

G

51 52 49 50 48 46 47 3
To LHS Door

Engine Bay Loom 64
ECU

43 44 45 35

Fuse Box

Additional 5 Connectors in base of fuse box

37 39 36 38 26

Cabin Loom

41 42 2 40 G 33

34 32 G

29

7

8

31 19 9 6 4 20 5 1 Front wiring loom layout Scale 1:10 when printed on A4 Sheet Scale 1:5 when printed on A3 Sheet Batt G Main BatteryGround/Earth Mount Rubber Firewall Grommet 13
ECU

25 24 22 16 15 17 12 18 21 23 28 27
To RHS Door

30

10 11 14

Page 2 of 19

Connector ID Quick Reference Table
# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Cabin Loom Circuit Opening Relay Fan/Blower Fan/Heater Assembly TEMS Computer / Module LHD Speaker (Cabin)Interior Light Door Switch (Left Door) To Power Windows (Left Door) To Power Mirrors (Left Door) Roof / Dome / Interior Light Heater & A/C Dash Controls (Fan, Vent Direction, Recirc/Fresh Air) Air vent Direction Motor ECU Cigarette Lighter Stereo Rear plug Clock (Upper Dash) Instrument Cluster (Blue Connector) Instrument Cluster (White Connector) Instrument Cluster (Boost Pressure Gauge & Lo/Hi Light)Turn Signal / Indicator Flasher Module Relay Light Reminder Module Brake Pedal Switch Door Control Module RHS Speaker (Cabin) Fog Light On/Off Switch TEMS Switch Relay (hardwired) Power Windows To Power Windows (Right Door) To Power Mirrors (Right Door) Interior Light Door Switch (Right Door) To Rear Wiring Loom Power Window Control Buttons Hazard Light Button Lo/Hi Boost Button Rear WindowDemister Button Power Mirrors Adjustment Buttons Ignition Barrel Steering column combination switch (Rear Wiper) Steering column combination switch (Front Wipers) Steering column combination switch (Lights & Indicators) Foot/Lower Air Direction Motor To Engine Bay Loom (Connector 46) To Engine Bay Loom (Connector 47) # 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70...