Udc3500
Páginas: 489 (122094 palabras)
Publicado: 23 de marzo de 2012
UDC3500 Universal Digital Controller Product Manual
51-52-25-120 March 2007
Honeywell Process Solutions Industrial Measurement and Control
Notices and Trademarks
Copyright 2007 by Honeywell Revision 3 March 2007
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office forwarranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice.The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Honeywell Process Solutions Industrial Measurement andControl 512 Virginia Drive Fort Washington, PA 19034
UDC3500 is a U.S. registered trademark of Honeywell Other brand or product names are trademarks of their respective owners.
3/07
UDC3500 Universal Digital Controller Product Manual
ii
About This Document
Abstract
This document provides descriptions and procedures for the Installation, Configuration, Operation, andTroubleshooting of your UDC3500 Controller.
Contacts
World Wide Web
The following lists Honeywell’s World Wide Web sites that will be of interest to our customers.
Honeywell Organization Corporate Industrial Measurement and Control Technical tips
WWW Address (URL) http://www.honeywell.com http://www.honeywell.com/ps http://content.honeywell.com/ipc/faq
Telephone
Contactus by telephone at the numbers listed below.
Organization United States and Canada Honeywell Phone Number 1-800-423-9883 1-800-525-7439 Tech. Support Service
3/07
UDC3500 Universal Digital Controller Product Manual
iii
Symbol Definitions
The following table lists those symbols used in this document to denote certain conditions.
Symbol Definition This CAUTION symbol onthe equipment refers the user to the Product Manual for additional information. This symbol appears next to required information in the manual.
WARNING PERSONAL INJURY: Risk of electrical shock. This symbol warns the user of a potential shock hazard where HAZARDOUS LIVE voltages greater than 30 Vrms, 42.4 Vpeak, or 60 VDC may be accessible. Failure to comply with these instructionscould result in death or serious injury. ATTENTION, Electrostatic Discharge (ESD) hazards. Observe precautions for handling electrostatic sensitive devices
Protective Earth (PE) terminal. Provided for connection of the protective earth (green or green/yellow) supply system conductor.
Functional earth terminal. Used for non-safety purposes such as noise immunity improvement.NOTE: This connection shall be bonded to protective earth at the source of supply in accordance with national local electrical code requirements. Earth Ground. Functional earth connection. NOTE: This connection shall be bonded to Protective earth at the source of supply in accordance with national and local electrical code requirements. Chassis Ground. Identifies a connection to thechassis or frame of the equipment shall be bonded to Protective Earth at the source of supply in accordance with national and local electrical code requirements.
3/07
UDC3500 Universal Digital Controller Product Manual
iv
Contents
1
1.1 1.2 1.3 1.4
INTRODUCTION ...................................................................................................1...
51-52-25-120 March 2007
Honeywell Process Solutions Industrial Measurement and Control
Notices and Trademarks
Copyright 2007 by Honeywell Revision 3 March 2007
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office forwarranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice.The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Honeywell Process Solutions Industrial Measurement andControl 512 Virginia Drive Fort Washington, PA 19034
UDC3500 is a U.S. registered trademark of Honeywell Other brand or product names are trademarks of their respective owners.
3/07
UDC3500 Universal Digital Controller Product Manual
ii
About This Document
Abstract
This document provides descriptions and procedures for the Installation, Configuration, Operation, andTroubleshooting of your UDC3500 Controller.
Contacts
World Wide Web
The following lists Honeywell’s World Wide Web sites that will be of interest to our customers.
Honeywell Organization Corporate Industrial Measurement and Control Technical tips
WWW Address (URL) http://www.honeywell.com http://www.honeywell.com/ps http://content.honeywell.com/ipc/faq
Telephone
Contactus by telephone at the numbers listed below.
Organization United States and Canada Honeywell Phone Number 1-800-423-9883 1-800-525-7439 Tech. Support Service
3/07
UDC3500 Universal Digital Controller Product Manual
iii
Symbol Definitions
The following table lists those symbols used in this document to denote certain conditions.
Symbol Definition This CAUTION symbol onthe equipment refers the user to the Product Manual for additional information. This symbol appears next to required information in the manual.
WARNING PERSONAL INJURY: Risk of electrical shock. This symbol warns the user of a potential shock hazard where HAZARDOUS LIVE voltages greater than 30 Vrms, 42.4 Vpeak, or 60 VDC may be accessible. Failure to comply with these instructionscould result in death or serious injury. ATTENTION, Electrostatic Discharge (ESD) hazards. Observe precautions for handling electrostatic sensitive devices
Protective Earth (PE) terminal. Provided for connection of the protective earth (green or green/yellow) supply system conductor.
Functional earth terminal. Used for non-safety purposes such as noise immunity improvement.NOTE: This connection shall be bonded to protective earth at the source of supply in accordance with national local electrical code requirements. Earth Ground. Functional earth connection. NOTE: This connection shall be bonded to Protective earth at the source of supply in accordance with national and local electrical code requirements. Chassis Ground. Identifies a connection to thechassis or frame of the equipment shall be bonded to Protective Earth at the source of supply in accordance with national and local electrical code requirements.
3/07
UDC3500 Universal Digital Controller Product Manual
iv
Contents
1
1.1 1.2 1.3 1.4
INTRODUCTION ...................................................................................................1...
Leer documento completo
Regístrate para leer el documento completo.