Ups-ge-11u

g GE Industrial Systems

INSTALLATION / USER MANUAL

Digital Energy™ LP 11U
Uninterruptible Power Supply 5-6-8-10 kVA

GE Digital Energy
General Electric Company CH - 6595 Riazzino (Locarno) Switzerland Telephone +41 (0)91 / 850 51 51 Fax +41 (0)91 / 850 51 44 Website www.gedigitalenergy.com

LP 11U UPS

Technology for the Digital World.

ver 3.0 - US

g
OPERATING MANUALDigital Energy LP 5/6/8/10-11U UPS LX-DOC File: OPM_LPU_11U_5K0_10K_1US_V030 Manual version 3.0 Software version R2.11

Digital Energy™ LP Series

INSTALLATION / USER MANUAL

Digital Energy™ LP 11U
Uninterruptible Power Supply 5-6-8-10 kVA

Preface

We thank you for selecting a General Electric Digital Energy™ LP Series Uninterruptible Power Supply (UPS) and recommend that you read theseinstructions carefully before installation and start-up of the UPS. Please keep this manual in a safe place for future reference and carefully read the important safety instructions in chapter 1 before installation of this device.

© 2003 by GE Industrial Systems
All rights reserved. The information contained in this publication is intended solely for the purposes indicated. The present publicationand any other documentation supplied with the UPS system is not to be reproduced, either in part or in its entirety, without the prior written consent of GE. The illustrations and plans describing the equipment are intended as general reference only and are not necessarily complete in every detail. The content of this publication may be subject to modification without prior notice, no liabilitycan be accepted for any error or omission.

LX: OPM_LPU_11U_5K0_10K_1US_V030

1

GE DE LP 11U UPS: Installation / User Manual 3.0 (US)

g
CONTENTS

Digital Energy™ LP Series

1

1.1 Save these instructions 1.2 General 1.3 Installation 1.4 Storage 1.5 Batteries 2.1 Description 2.2 Warranty

IMPORTANT SAFETY INSTRUCTIONS..................................... 4

2

INTRODUCTION......................................................................... 6

3

3.1 Principles of Operation 3.2 Normal Conditions 3.3 Utility Failure 3.4 Automatic Bypass Switch 3.5 Manual Bypass Switch 4.1 Transport 4.2 Unpacking 4.3 Package Contents 4.4 Location 4.5 Installation

FUNCTIONAL EXPLANATION.................................................... 7

4INSTALLATION............................................................................ 9

4.5.1 Installation Procedures

4.5.2 Available input voltages: hardware modifications
4.5.2.1 Input voltage 208 or 240Vac 4.5.2.2 Input voltage 120Vac (optional, 5/6kVA only) 4.5.3.1 Output voltage 208Vac 4.5.3.2 Output volatge 120Vac split-phase 4.5.3.3 Output voltage 220/230/240Vac 4.5.3.4 Output voltage 120Vac single phase4.5.1.1 Standard installation procedure: Vin 208-240Vac, Vout 120/208/220/230/240Vac 4.5.1.2 Installation procedure: Vin 120Vac (optional 5/6kVA), Vout 120/208/220/230/240Vac

4.5.3 Available output voltages: hardware modifications

4.5.4 Input / output voltages: Software modification 4.5.5 Installation of DE LP battery extension pack(s) 4.5.6 LP-11U series: 2 / 3 / 4 parallel operating units- additional info
4.5.6.1 Notes concerning installation of a parallel system 4.5.6.2 Notes concerning starting up the parallel system 4.5.6.3 Notes concerning use / maintenance of a parallel system

5

5.1 Description of Front and Rear Panel 5.2 Start-up 5.3 Use
5.3.1 Information menu 5.3.2 Status and alarm menu 5.3.3 Service menu 5.3.4 Set-up menu 5.4.1 Battery test, general 5.4.2 Quickbattery test 5.4.3 Deep battery test 5.5.1 Shutdown 5.5.2 Utility start 5.5.3 Sleep and wake-up 5.5.4 Overload protection in bypass mode 5.5.5 ECO-Mode 5 5.6 Auto restart 5.5.7 Superior battery management

OPERATION .............................................................................. 22

5.4 Test Screens

5.5 Other Features

LX: OPM_LPU_11U_5K0_10K_1US_V030

2

GE DE LP 11U...