Vacio

Please note that this is not the only way to solve it, you may want to share if you have better ideas.

1. How to check and repair bad block

a). Please make sure that you are SuperCID and youunderstand the importance of hard spl as this maybe a dangerious operation for you.
b). Downloan Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of youractivesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port boxand then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fixthe bad blocks.

That's what I had done and solved...

2. How to reset call timer (if you want to know reason why you want to do this, please do additional research)

a). Please make sure thatyou are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Make sure that you have SPL 1.10 Olipro (this one works for me, higher version seems notwork)
c). Downloan Mtty.exe file in the attachment below and save it to your computer.
d). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
e). Putyour divice into Bootloader mode and connect to your PC via USB
f). Run Mtty.exe from your PC
g). Selec "USB" in port box and then click OK
h). Press Enter once or twice to let the screen dispay"USB>" or "CMD>"
i). Type "rtask b" and Enter then it should show result "0"
j). then type "ate1" and Enter then it should show result "0"
k).then type "atv1" and Enter then it should show result"OK"
l). then type "at@talk=270f,270f" and Enter then it should show result "OK"

Restart you PPC.... you call timer should be 00.00.00

Enjoy!!!

List of Commands
task 28 - format DiskOnChip...