Variador

COMBIVERT
GB

Installation Manual 1.5…2.2 kW 2.2…4.0 kW

Housing B 230 V 400 V

The general EMC and safety directions at www. keb.de have to be observed ! Mat.No. 00B60EMKB00 Rev. 1H

GB

GB - 3

This manual describes the KEB COMBIVERT B6. Particular attention is paid to the installation, the connection as well as the basic operation. Due to the various application and programmingpossibilities, the application-specific connection and/or wiring diagram, the parameter adjustment as well as instructions to the start-up are to be taken from the documentation of the machine manufacturer. A list of instruction manuals and documents giving assistance for the construction, documentation and service is provided at the end of this manual. The safety and warning notes listed in thisinstruction manual as well as in other documentation must be observed at any rate to ensure a safe operation. The safety and warning instructions specified in this manual do not lay claim on completeness. KEB reserves the right to change/adapt specifications and technical data without prior notice. The used pictograms have following significance: Danger Warning Caution Attention observe at allcosts Information Aide Tip The information contained in the technical documentation, as well as any user-specific advice in spoken and written and through tests, are made to best of our knowledge and information about the application. However, they are considered for information only without responsibility. This also applies to any violation of industrial property rights of a third-party. Inspectionof our units in view of their suitability for the intended use must be done generally by the user. Inspections are particulary necessary, if changes are executed, which serve for the further development or adaption of our products to the applications (hardware, software or download lists). Inspections must be repeated completely, even if only parts of hardware, software or download lists aremodified. Original spare parts and authorized accessories by the manufacturer serve as security. The use of other parts excludes liability for the damages which can result from it. Application and use of our units in the target products is outside of our control and therefore lies exclusively in the area of responsibility of the user. Unauthorised opening and tampering may lead to bodily injury andproperty damage and may entail the loss of warranty rights.

GB - 4

Table of Contents
Safety and Operating 6. Error and Status Display...........28 Instructions ..................................6 Annex A ...............................................35 2. Product description.....................7 A.1 Overload characteristic ................35 2.1 Intended use..................................7 A.2 Calculation of the motor voltage ..35 2.2 Unit identification ...........................7 A.3 Maintenance ................................35 2.3 Technical data................................8 A.4 Storage ........................................36 2.3.1 230 V class ............................................ 8 A.5 Activation of the temperature 2.3.2 400 V class............................................ 9 input (only housing B) ..................37 2.4 Dimensions and Terminals ..........10 Annex B ...............................................39 3. Installation and Connection ..... 11 B.1 CE-Marking..................................39 3.1 Control cabinet installation .......... 11 B.2 UL marking ..................................39 3.2 EMC conform Installation ............ 11B.3 Additional Manuals ......................40 3.3 Connection of power circuit .........12
3.3.1 3.3.2 3.3.3 3.3.4 3.3.5 3.3.6 Wiring instructions ............................... 12 Mains connection ................................ 12 DC connection ..................................... 13 Motor connection ................................. 13 Wiring example braking resistor .......... 14 Note...