Varios

Muy pornto buenos archivos paCuales son todas esas abreviaturas que la gente usa para los
altavoces?
La mayoría de estos parámetros están bien documentados en el Loudspeaker
Design Cookbook. (ver12.9), en resumen:
Fs Driver free air resonance, in Hz. This is the point at which driver impedance
is maximum.
Fc System resonance (usually for sealed box systems), in Hz
Fb Enclosure resonance(usually for reflex systems), in Hz
F3 -3 dB cutoff frequency, in Hz
Vas "Equivalent volume of compliance", this is a volume of air whose
compliance is the same as a driver's acoustical complianceCms (q.v.), in cubic
meters
D Effective diameter of driver, in meters
Sd Effective piston radiating area of driver in square meters
Xmax Maximum peak linear excursion of driver, in meters
VdMaximum linear volume of displacement of the driver (product of Sd times
Xmax), in cubic meters.
Re Driver DC resistance (voice coil, mainly), in ohms
Rg Amplifier source resistance (includes leads,crossover, etc.), in ohms
Qms The driver's Q at resonance (Fs), due to mechanical losses; dimensionless
Qes The driver's Q at resonance (Fs), due to electrical losses; dimensionless
Qts The driver's Qat resonance (Fs), due to all losses; dimensionless
Qmc The system's Q at resonance (Fc), due to mechanical losses;
dimensionless
Qec The system's Q at resonance (Fc), due to electrical losses;dimensionless
Qtc The system's Q at resonance (Fc), due to all losses; dimensionless
n0 The reference efficiency of the system (eta sub 0) dimensionless, usually
expressed as %
Cms The driver'smechanical compliance (reciprocal of stiffness), in m/N
Mms The driver's effective mechanical mass (including air load), in kg
Rms The driver's mechanical losses, in kg/s
Cas Acoustical equivalent ofCms
Mas Acoustical equivalent of MmsCuales son todas esas abreviaturas que la gente usa para los
altavoces?
La mayoría de estos parámetros están bien documentados en el Loudspeaker
Design...