Wekd
Páginas: 3 (526 palabras)
Publicado: 2 de febrero de 2012
Technical Division-Machine Shop
Welding Procedure Specification
Welding Procedure Specification No.:
Revision No.: Revision Date:
WPS AMI/Orbital 001
Remarks:Date: 12/29/2009**
Supporting PQR No.(s): PQR AMI/Orbital 001
Welding Processes:
GTAW/Automatic
(2)
(Manual, Automatic, Machine, Semi-automatic)
Joints (QW-402): Joint Design: Square Edge GrooveRetainer: No Joint Details:
Backing: Gas Backing Material (Type): Argon Gas Type: Non-Metallic *** Metallic (Non-fusing)
Remainder:
.035
.250 0.0to 0.002 opening Square Edge Butt
ASTM A269316/316L .035 x 0.250
AMI Orbital Welding Machine (Autogenous only) S-No.: 8 Group1 TO Base Metals (QW403): Specification Type and Grade: ASTM A 269 Type 316/316L TO Specification Type and Grade: ASTM A269 Type 316/316L OR Chemical Analysis and Mechanical Properties: TO Chemical Analysis and Mechanical properties: Thickness Range: Process 1 Groove: .035 Fillet: Unlimited Base Metal: Groove: .035Fillet: Unlimited Deposited Weld Metal: Groove: .250 Minimum Fillet: Unlimited Pipe Diameter Range: Other: Filler Metals (QW-404) Specification No. (SFA): AWS No, (Class): F-No.: A No.: Size of FillerMetals: Deposited Weld Metal Thickness Range: Electrode-Flux (Class): Flux Trade Name: Consumable Insert:
Other:
Each Base Metal-Filler Metal Combination should be recorded individually
S-No.:
8 Group1
Process 2
Groove: Groove: Groove: Fillet: Fillet: Fillet:
Process 1 Autogenous – No Filler
Process 2
8
Groove:
Fillet: Unlimited
Groove:
Fillet:
Page 1 of 2
12/29/09
Fermi NationalAccelerator Laboratory
Technical Division-Machine Shop
Welding Procedure Specification
Positions (QW-405 Positions of Groove: Welding Progression Positions of Fillet Preheat (QW-408) Preheat Temperature:Interpass Temperature: Preheat Maintenance: Minimum Welding Temperature All Upward & downward All Post Heat Treatment (QW-407) Temperature Range: None Time Range N/A
Gas (QW-408) Minimum 50 F...
Leer documento completo
Regístrate para leer el documento completo.