Work tools

JOHANN RENE BERRIOS NAVARRO FICHA: 324
MATERIA: INGLES
CATEDRATICA:REYNA PINEDA

C.T.H.A
CENTRO TECNICO HONDUREÑO ALEMAN
WORK TOOLS

ANVIL (yunque)
An anvil is an iron tool. It is made from a solid block of stone or metal used as support to forge metals such as iron or steel.
AXE (hacha de doble hoja)
An ax is a tool with a metallic edge which is securely attached to a handle,usually of wood, which aims at cutting by strokes.

The typical use for the axes is cutting firewood and felling trees, but in the past were used as weapons for hunting and war, especially by the Vikings, Normans, Indian, English, French, etc., Which were used as battle-ax and hatchet from the Neolithic, or throwing axes (Francis, tomahawk).

CLAMP (prensa de mano)
clamp is a tool used to firmlysecure parts or components that they want to apply any mechanical operation. Is a set very sturdy metal with two jaws, one of which is fixed and the other opens and closes when turned with a lever square-threaded screw.
CALIPER (calibrador)
Size, also called gauge, bevel sliding caliper, vernier caliper, or Vernier coliza foot is an instrument for measuring dimensions of relatively small objects,from centimeters to fractions of a millimeter (1 / 10 of a millimeter, 1 / 20 mm, 1 / 50 of a millimeter). On a scale of inches has divisions equivalent to 1 / 16 of an inch, and, vernier to 1 / 128 inch.

CAULKING GUN (pistola de calafateo)
Caulking gun serves to ceramic wood sealer. The sealant is placed in the back
CHANNEL LOCKS (tenaza)
Is a very old whose use is applied to theextraction of nails, wire cutting or other elements and perform different functions, for which can be adapted according to the criteria of who uses it. Extensible tongs instead (much more modern, also known as parrot's beak parrot's beak or clip) is a useful tool for the versatility of functions you can perform. As an example we can say that the latter can hold elements of different thicknesses, unlikethe normal pliers whose opening is fixed and achieved a measure of openness that makes it more limited in this respect. Notwithstanding the usual claw is very practical and applicable to many tasks that other tools can not perform. That is why despite being one of the oldest tools, still it is necessary to carry out tasks that constitute an irreplaceable part.

CHISEL WOOD (formon)
The gouge orchisel is a free cutting hand tool used in carpentry. It consists of iron steel sheet, between 4 and 40 mm wide, with a mouth formed by a bevel, and wooden handle. The length of handle to tip is 20 cm. The edge angle is between 25-40 degrees, depending on the type of timber to work: softwood lumber, the lower angle, hardwood greater angle.

CUTTING TOOL (cuchilla)
Used for cutting leather.There are different types depending on application. The best performance and simple cuts on all skin types, are not too wide blade, blade reinforced on the outside and the body can be plasticEscuchar

DIAGONAL CUTTER (tenaza cortadora en diagonal)
Diagonal pliers (or wire cutters or diagonal cutting pliers) are pliers intended for the cutting of wire (they are generally not used to grab or turnanything). They are sometimes called side cutting pliers or side cutters, although these terms are shared by other pliers designs, such as lineman's pliers, and may lead to confusion. The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or "on a diagonal", hence the name. Instead of using a shearing action as with scissors, they cut by indenting and wedging thewire apart.
DRILL ELECTRIC (taladro electrico)
A drill or drill motor is a tool fitted with a rotating cutting tool, usually a drill bit, used for drilling holes in various materials. The cutting tool is gripped by a chuck at one end of the drill and rotated while pressed against the target material. The tip of the cutting tool does the work of cutting into the target material. This may be...