Xbox : d

XboX 360® ImporTanT InFormaTIon
Read this guide for important safety, health, and regulatory information and the terms of the Limited Warranty that cover the Xbox 360 video game system that you have purchased. This document includes important information about several Xbox 360 products. p revent the Console from overheating Do not block any ventilation openings on the console or power supply.Do not place the console or power supply on a bed, sofa, or other soft surface that may block ventilation openings. Do not place the console or power supply in a confined space, such as a bookcase, rack, or stereo cabinet, unless the space is well ventilated. Do not place the console or power supply near any heat sources, such as radiators, heat registers, stoves, or amplifiers. avoid smoke andDust Do not use the console in smoky or dusty locations. Smoke and dust can damage the console, particularly the DVD drive. position Your Xbox You can position your console horizontally or vertically, whichever you prefer. However, if you change your console’s orientation, make sure it is turned off with no disc in the tray. However you position your console, make sure to not block anyventilation openings or the IR receiver. Disc Use Make sure the disc is held in place by the tabs on the disc tray so that it doesn’t fall out. To avoid jamming the disc drive and damaging discs or the console: • Remove discs before moving the console or tilting it between the horizontal and vertical positions. • Never use cracked discs. They can shatter inside the console and jam or break internal parts.• When the console is vertical, do not use discs that are smaller than standard DVDs and CDs. Connect additional Controllers To connect additional wireless controllers to your console, or to connect your controller to a different console, follow these steps. To connect a wireless controller to your console: 1 Press and hold down the Xbox Guide button until the controller turns on. 2 Make surethe console is turned on. If not, touch the power button and allow the console to completely start up. When the Xbox Dashboard or inserted disc runs, the console is ready. 3 Press the connect button on the console and wait for the console lights to spin. 4 Press the connect button on the controller and wait for the controller lights to spin. After the lights on the controller and console spinand flash once, the controller is connected. Headset Damage To prevent damage to any headset, avoid sitting or stepping on the headset, its cable, or the cable connector. Important Stationary images in video games can “burn” into some TV screens, creating a permanent shadow. Consult your TV owner’s manual of manufacturer before playing games. Do not connect the console through a VCR. Video signalsfed through VCRs may be affected by copyright protection systems and the picture will be distorted on the TV.

This symbol identifies safety and health messages in this manual and in other product manuals.

InITIal Console seT Up
Failure to properly set up, use, and care for the Xbox 360 video game and entertainment system can increase the risk of serious injury or death, or damage tothe Xbox 360 video game and entertainment system. Read this manual and the manuals of any accessories for important safety and health information. Keep all manuals for future reference. For replacement manuals, go to www.xbox.com/support. The Limited Warranty and Software License covering this product appear in this manual; this manual is also available online at www.xbox.com/support. The LimitedWarranty and Software License are also available online at www.xbox.com/warranty and www.xbox.com/sla, respectively. Before allowing children to use the Xbox 360 video game system: 1 Determine how each child can use the Xbox 360 console (playing games, connecting to Xbox LIVE®, chatting or video messaging with other players online, replacing batteries, making electrical, AV cable, and network...