Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

USER GUIDE

Cross Platform Control
This Guide covers the operation for both the M1 and M1G models

M1 Cross Platform Control - User Guide This system consists of a main control unit, one or more keypads, and various contact sensors and detectors. The control unit is generally placed in an out of sight location such as a closet, utility room, etc. It houses the main electronics and abackup battery for standby power. Ordinarily, there is no reason for anyone except the installer or service personnel to have access to the control unit. Keypads are the primary user interface, and they display the current system status using their LCD screen and LED lights. Keypads also produce audible feedback at appropriate times. Generally speaking, a keypad is installed adjacent to anyprimary entry/exit door(s). THIS MANUAL IS PROVIDED TO ACQUAINT YOU WITH THE OPERATION OF THE SYSTEM AND HELP YOU BECOME PROFICIENT WITH IT’S OPERATION. ALL USERS SHOULD READ AND FOLLOW THE INSTRUCTIONS AND CAUTIONS IN THIS MANUAL. FAILURE TO DO SO COULD RESULT IN THE SYSTEM NOT WORKING PROPERLY. KEEP THIS MANUAL IN AN EASY TO ACCESS LOCATION. READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY.IF YOU DO NOT UNDERSTAND ANY PORTION OF THIS MANUAL OR IF YOU HAVE ANY QUESTIONS ABOUT YOUR SYSTEM, CONTACT THE INSTALLING COMPANY FOR ASSISTANCE. PLEASE BE AWARE OF THE FOLLOWING: The level of security obtained is directly related to two major factors. 1. The quantity, quality, and placement of sensors attached to this system. 2. The knowledge and operating skills that you have of thesystem, including but not limited to the weekly testing of the complete system. Important notes when preparing a security/safety plan for your home or business: 1. This system is an electronic device and is subject to failure or malfunction. You should not rely on it as your single source of security. 2. This system will not work without power. 3. This system should be tested weekly. 4. Audiblewarning devices will need to be loud enough, wired correctly, and properly placed to provide adequate notification of an alarm event. 5. Smoke and heat detectors may not detect smoke and heat in all situations. 6. Only qualified security professionals should install and maintain this system. 7. It may be possible to arm this system WITHOUT the backup battery connected or with less than anadequate charge. Weekly testing of the system with AC Power removed should be performed to verify that the battery is connected and adequately charged. 8. Care should be taken after testing to make certain that AC Power is restored. The National Fire Protection Association publishes a standard for household fire warning equipment. N.F.P.A. #74. Further Information can be obtained bycontacting; NEPA Public Affairs Dept., Batterymarch Park. Quincy, MA 02269. Page 2

M1 Cross Platform Control - User Guide

TABLE OF CONTENTS
Understanding The Keypad ........................................................................... 4 System Notes ................................................................................................. 6 Operating The System................................................................................... 7
User Codes .............................................................................................................. 7 Checking the Ready Status ................................................................................... 7 Arming in the “Away” Mode.................................................................................. 8 Arming in the “Vacation” Mode ............................................................................ 8 Arming in the “Stay” Mode .................................................................................... 8 Auto Stay Arming .................................................................................................... 9 Using the Quick Arm...