Yo Prueba

IFD501-01SK-E / IFD501-01UK-E INTERFACE BOARD TECHNICAL REFERENCE
U00112772200

Seiko Instruments Inc.

IFD501 INTERFACE BOARD TECHNICAL REFERENCE Document Number U00112772200 First Edition August 2008

Copyright © 2008 by Seiko Instruments Inc. All rights reserved. Seiko Instruments Inc. (hereinafter referred to as “SII”) has prepared this technical reference for use by SII personnel,licensees, and customers. The information contained herein is the property of SII and shall not be reproduced in whole or in part without the prior written approval of SII. SII reserves the right to make changes without notice to the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented,including but not limited to typographical, arithmetic, or listing errors.

is a trademark of Seiko Instruments Inc.

PREFACE

This technical reference manual describes the specifications, functions, and operating procedures for the IFD501-01SK-E/01UK-E. The IFD501-01SK-E/01UK-E is an interface board for the LTPDx45 or CAPDx45 series printer. In this technical reference manual, the IFD501 isused when referring to contents common to all models. The IFD501-01SK-E or IFD501-01UK-E that omitted ’-E’ is used when referring to contents indigenous to each. This reference manual also describes the print operation of the LTPDx45 or CAPDx45 series printer. Read this technical reference manual thoroughly before using. SII has not investigated the intellectual property rights of the samplecircuits included in this manual. Fully investigate the intellectual property rights of these circuits before using. The IFD501 complies with EU RoHS Directive (2002/95/EC). The IFD501 contains “Pb”, the details are described below: • A particular copper alloy parts, a particular component in glass of electronic parts.
*Lead-containing items listed above are exempt from EU RoHS (2002/95/EC).

1TABLE OF CONTENTS

Section CHAPTER 1 OVERVIEW 1.1 1.2 1.3 1.4

Page

PRODUCT DESCRIPTION ............................................................................................................. 1-1 PRECAUTIONS............................................................................................................................... 1-2 TERMINOLOGY.............................................................................................................................. 1-3 NOTATION IN THE TECHNICAL REFERENCE ............................................................................ 1-5 CHAPTER 2 GENERAL SPECIFICATIONS CHAPTER 3 CONNECTOR AND THERMINAL FUNCTIONS

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

POWER SUPPLY CONNECTOR(CN1)......................................................................................... 3-1 THERMAL HEAD, MOTOR, SENSOR CONNECTOR (CN2) ........................................................ 3-2 AUTOCUTTER CONNECTOR (CN3) ............................................................................................. 3-4 OPTIONAL MARK SENSOR CONNECTOR (CN4)........................................................................ 3-4 EXTERNALI/O CONNECTOR (CN5)............................................................................................. 3-5 NEAR END SENSOR CONNECTOR (CN6)................................................................................... 3-6 RS-232 CONNECTOR (CN7) (FOR IFD501-01SK-E) ................................................................... 3-6 USB INTERFACE CONNECTOR (CN8) (FORIFD501-01UK-E)................................................... 3-7 CHAPTER 4 BASIC OPERATION

4.1 4.2

4.3

BASIC STRUCTURE ...................................................................................................................... 4-1 BASIC PRINT OPERATION............................................................................................................ 4-3 4.2.1 Initialization...