Zelio Soft Fbd

Bit Logic Instructions Comparison Instructions Conversion Instructions

1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C

SIMATIC
Counter Instructions

Function Block Diagram (FBD) for S7-300 and S7-400 Programming
Reference Manual

Data Block Instructions Jump Instructions Integer Math Instructions Floating-Point Math Instructions Move Instructions Program Control Instructions Shift and RotateInstructions Status Bit Instructions Timer Instructions Word Logic Instructions

This manual is part of the documentation package with the order number: 6ES7810-4CA10-8BW1

Overview of All FBD Instructions Programming Examples

05/2010

A5E02790131-01

Working with Function Block Diagram

Legal information Warning notice system
This manual contains notices you have to observe in order to ensure yourpersonal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken.WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken. CAUTION without a safety alert symbol, indicates that property damage can result if proper precautions are not taken. NOTICE indicates that an unintended result or situationcan occur if the corresponding information is not taken into account. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.

Qualified Personnel
The product/system described in this documentation may be operatedonly by personnel qualified for the specific task in accordance with the relevant documentation for the specific task, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.

Proper use of Siemens products
Note thefollowing: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operatesafely and without any problems. The permissible ambient conditions must be adhered to. The information in the relevant documentation must be observed.

Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer ofLiability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG Industry Sector Postfach 48 48 90026 NÜRNBERGGERMANY

A5E02790131-01 Ⓟ 02/2010

Copyright © Siemens AG 2010. Technical data subject to change

Preface
Purpose
This manual is your guide to creating user programs in the Function Block Diagram (FBD) programming language. The manual also includes a reference section that describes the syntax and functions of the language elements of Function Block Diagram.

Basic Knowledge Required
The manual is...