V-Tech

Appendix
Expand your telephone system
Your telephone base can support up to five handsets. Each handset must be
registered to the telephone base before use.
The handsets provided within yourproduct package are already registered as
HANDSET 1 and so forth. You can add new handsets (DS6501/DS6501-12/
DS6501-15/DS6501-16, purchased separately) to your telephone base. Additional
handsetsare assigned numbers in the sequential order they are registered (up to
HANDSET 5).
Add and register a handset
When first purchased, each expansion handset alternately shows To register HS...and ...see manual. The new handset should be charged without interruption for at
least 30 minutes before registering it to the telephone base.
To register a handset:
Do not place the handset in thecharger.
1. Place the new/non-registered handset in the telephone base.
2. Wait for about 10 seconds. The handset shows Registering... then Registered
and you hear a beep when the registrationprocess completes. The registration
process takes about 90 seconds to complete.
If registration fails, the handset displays Failed. Please start again from
Step 1 above.
NOTE : You cannotregister a handset if any other system handset is in use.
If you have not set the date and time for the telephone system, the handset will
prompt you to set the date and time after it is registered tothe base. To skip
setting, press CANCEL.
Appendix
Deregister handsets
If you want to replace a handset, or reassign the designated handset number of
a registered handset, you must deregister allhandsets that are registered to the
telephone base. Then register each handset individually.
To make deregistration easier, read all of the instructions on this page before
you begin.
Toderegister all handsets:
1. Press and hold /FIND HANDSET on the telephone base for about 10 seconds
until the IN USE light flashes
2. Immediately press /FIND HANDSET again. You must press /FIND...