dajksndjkas

Universal Remote
Instruction Manual

RM24911
rev. 1/07

 Table of Contents
Introduction ............................................................ 3
Setup ..................................................................... 3
Battery Installation ............................................ 3
Battery Saver.................................................... 3
Code Saver...................................................... 3
Code Setup ...................................................... 3
Button Functions .............................................. 4
Direct Code Entry ............................................. 6
Code Search .................................................... 7
Using Your Remote................................................ 8
CodeIdentification............................................ 8
Using SHIFT ..................................................... 9
Sleep Function ............................................... 10
Controlling Devices with Power On and Off ... 11
Controlling Combo Devices ............................ 11
VCR/DVD/DVR Punch-Through ..................... 11
Volume/Mute Control and Punch-Through ..... 12All Volume/Mute Control to any one Mode ..... 12
Setting any Mode for its own Volume/Mute .... 13
Troubleshooting ................................................... 14

Congratulations on your purchase of the RM24911
Universal Remote Control. The RM24911 is one
of the most easy to use remote controls available
today. With the RM24911, juggling multiple remote
controls is a thing of thepast! Your RM24911
controls up to three devices, including the most
popular brands of TV, VCR, DVD, CBL, and SAT.
The RM24911 is easy to use, easy to program,
and it gives you total control—at the touch of your
fingertips!
Note: Some functions from your original remote
may not be controlled by this remote. Use the
original remote, if available, to control such
functions. Sometimes buttonsother than described
in these instructions may actually perform the
function. For example, the CHAN and VOL
buttons might be used to navigate through menu
choices. We recommend you experiment with the
remote to identify if such situations pertain to your
equipment.
2

 Setup
Battery Installation
1. On the back of the remote, push down on the
tab and lift the cover off.
2. Match thebatteries to the + and - marks inside
the battery case, then insert 2 AAA Alkaline
batteries.
3. Press the battery cover back into place.

Battery Saver
Your remote automatically turns off if the buttons
are depressed more than 30 seconds. This will
save your batteries should your remote get stuck in
a place where the buttons remain depressed (e.g.,
between the sofa cushions).

CodeSaver
You will have up to 10 minutes to change the
batteries in your remote without losing codes you
have programmed. However, do not press any
buttons until batteries are installed in the remote.
If buttons are pressed without batteries in the
remote, all codes will be lost.

Code Setup
The SETUP button is used to setup the remote.
You can either setup the remote using the code
tables(on separate sheet), or you can search
through the library of codes until you find a code
that works for your product. Please refer to “ Code
Search” on page 7 for more information on using
the code search feature to learn how to search
through the library of codes for your products.
NOTE: You can store any kind of code under any
mode (except TV). I.E. you can store a VCR code
under theCBL/SAT button, or a Cable code under
the DVD/VCR button, etc. However, you can only
store TV codes under the TV button.
3

 Button Functions
Some buttons on the remote might have functions that
are referred to by different names on the device you
are controlling. E.G. PREV.CH may be called RECALL,
or ENTER may be called DISPLAY. These differences
depend on the brand and model of your...