Enrutamiento Dinamico Y Estatico Cisco

PROFESOR:
CARRERA:
T.S.U. TECNOLOGIAS DE LA INFORMACION Y COMUNICACION
GRADO: 2DO GRUPO:
2 DO. “D”
MATERIA:
REDES DE AREA LOCAL
TEMA:
“ENRUTAMIENTOESTATICO Y DINAMICO”











OBJETIVO:

LO QUE SE PRETENDE EN ESTA ACTIVIDAS ES A QUE APRENDAMOS A CONFIGURAR EL ENRUTAMINETO ESTATICO Y DINAMICOPARA ESTABLECER UN ENLACE DE COMUNICACIÓN DE DATOS ENTRE ROUTERS Y PC.

PROCEDIMIENTO
CONFIGURACIÓN DE RUTAS DINAMICAS
Aquí se muestra la configuración de cada Router
ROUTER 1 |
R1#config tEnter configuration commands, one per line. End with CNTL/Z.R1r(config)#router ripR1(config-router)#network 172.16.0.0R1(config-router)#network 192.168.3.0R1(config-router)#network192.168.4.0R1(config-router)#network 192.168.5.0R1(config-router)#network 192.168.6.0R1(config-router)#network 192.168.8.0R1(config-router)#network 192.168.9.0%SYS-5-CONFIG_I: Configured from console by consoleR1#copy run startDestination filename [startup-config]? Building configuration...[OK]R1# |

ROUTER 2 |
R2#config tEnter configuration commands, one per line. End with CNTL/Z.R2r(config)#routerripR2(config-router)#network 172.16.0.0R2(config-router)#network 172.17.0.0R2(config-router)#network 172.18.0.0R2(config-router)#network 172.19.0.0R2(config-router)#network 172.20.0.0R2(config-router)#network 192.168.3.0R2(config-router)#network 192.168.1.0R2(config-router)#network 192.168.4.0R2(config-router)#network 192.168.5.0%SYS-5-CONFIG_I: Configured from console by consoleR2#copy runstartDestination filename [startup-config]? Building configuration...[OK]R2# |

ROUTER 3 |
R3#config tEnter configuration commands, one per line. End with CNTL/Z.R3(config)#router ripR3(config-router)#network 172.16.0.0R3(config-router)#network 172.17.0.0R3(config-router)#network 172.18.0.0R3(config-router)#network 172.19.0.0R3(config-router)#network 172.20.0.0R3(config-router)#network192.168.1.0R3(config-router)#network 192.168.2.0R3(config-router)#network 192.168.6.0R3(config-router)#network 192.168.7.0R3(config-router)#network 192.168.8.0R3(config-router)#network 192.168.9.0%SYS-5-CONFIG_I: Configured from console by consoleR3#copy run startDestination filename [startup-config]? Building configuration...[OK]R3# |

ROUTER 4 |
R4#config tEnter configuration commands, one per line. Endwith CNTL/Z.R4(config)#router ripR4(config-router)#network 172.16.0.0R4(config-router)#network 172.17.0.0R4(config-router)#network 172.18.0.0R4(config-router)#network 172.19.0.0R4(config-router)#network 172.20.0.0R4(config-router)#network 192.168.1.0R4(config-router)#network 192.168.2.0R4(config-router)#network 192.168.3.0R4(config-router)#network 192.168.4.0R4(config-router)#network192.168.5.0%SYS-5-CONFIG_I: Configured from console by consoleR4#copy run startDestination filename [startup-config]? Building configuration...[OK]R4# |

ROUTER 5 |
R5#config tEnter configuration commands, one per line. End with CNTL/Z.R5(config)#router ripR5(config-router)#network 172.17.0.0R5(config-router)#network 172.18.0.0R5(config-router)#network 172.19.0.0R5(config-router)#network172.20.0.0R5(config-router)#network 192.168.1.0R5(config-router)#network 192.168.2.0R5(config-router)#network 192.168.3.0R5(config-router)#network 192.168.4.0R5(config-router)#network 192.168.7.0R5(config-router)#network 192.168.8.0%SYS-5-CONFIG_I: Configured from console by consoleR5#copy run startDestination filename [startup-config]? Building configuration...[OK]R5# |

ROUTER 6 |
R6#config tEnterconfiguration commands, one per line. End with CNTL/Z.R6(config)#router ripR6(config-router)#network 172.19.0.0R6(config-router)#network 172.20.0.0R6(config-router)#network 192.168.1.0R6(config-router)#network 192.168.2.0R6(config-router)#network 192.168.3.0R6(config-router)#network 192.168.4.0R6(config-router)#network 192.168.5.0R6(config-router)#network 192.168.6.0R6(config-router)#network...