Lx-300+ Users Guide

9-Pin Dot
Matrix Printer

9-Pin Dot
Matrix Printer

User's Guide

User's Guide

Printed in Japan
00.XX.XX

User's Guide

4012023-00
XXX

L

R4C4610
Rev. D
A5 size
12/12/00

Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi

COVER.FM
Pass 4

Control Panel Buttons and Lights
Tear Off lights**
q f f when continuous paper is in the
tear-off position,otherwise the lamps
indicate the selected font.

LF/FF button
Feeds paper line by
line when pressed
and released.
q Ejects a single sheet
or advances
continuous paper to
the next top-of-form
position when held
down.
q

Load/Eject button
Tear Off button**
q Advances continuous paper to the q Loads a single sheet of
paper.
tear-off position.
q Feeds continuous paper backward q Ejectsa single sheet of
paper if a sheet is
from the tear-off position to the toploaded.
of-form position.
q Loads continuous paper
from the standby
position.
q Feeds continuous paper
backwards to the
standby position.

Paper Out light
On when no paper is
loaded in the
selected paper
source or paper is not
loaded correctly.
q Flashes when paper
has not been fully
ejected or a paperjam has occurred.
q

Pause button
Stops printing temporarily,
and resumes printing
when pressed again.
When pressed for three
seconds, turns on the
micro adjust mode.* To
turn off, press again.
Pause light
q On when the printer is
paused.
q Flashes when the
printer is in the micro
adjust mode.*
q Flashes when the print
head has overheated.

*Micro Adjust mode
When you hold downthe Pause button for three seconds, the
printer enters the micro adjust mode. In this mode, you can
press the LF/FFD and Load/EjectU buttons to adjust the topof-form or tear-off position. See Chapter 2, “Using the Printer.”
**Font select
In Micro Adjust mode, you can select the font to use for
printing by pressing the Tear Off button. The Tear Off lights turn
on, off or flash to indicatethe selected font.

R

R4C4610
Rev. D

Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi

A5 size
12/12/00

FRONT.FM
Pass 4

®

9-Pin Dot Matrix Printer

All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, withoutthe prior written permission of SEIKO EPSON
CORPORATION. The information contained herein is designed only for use with this EPSON
printer. EPSON is not responsible for any use of this information as applied to other printers.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of
this product or third parties for damages, losses, costs, or expenses incurred bythe purchaser
or third parties as a result of: accident, misuse, or abuse of this product or unauthorized
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly
comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from
the use of any options orany consumable products other than those designated as Original
EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
EPSON and EPSON ESC/P are registered trademarks of SEIKO EPSON CORPORATION.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
IBM is a registered trademark of International Business Machines Corporation.
General Notice: Otherproduct names used herein are for identification purposes only and may be
trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2000 by SEIKO EPSON CORPORATION, Nagano, Japan.

User’s Guide

L

R4C4610
Rev. D
A5 size
12/12/00

Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi

FRONT.FM
Pass 4

FCC Compliance Statement...