Mantininiento Preventivo Maquinas De Soldar

INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES

Angle Grinder Meuleuse d'Angle Esmeriladora de Disco
GA7020,GA7021 GA9020

006732

DOUBLE INSULATION DOUBLE ISOLATION DOBLE AISLAMIENTO

WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. AVERTISSEMENT: Pour votre propre sécurité, prière de lire attentivementavant l'utilisation. GARDER CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE. ADVERTENCIA: Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la herramienta. 1 GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.

ENGLISH

SPECIFICATIONS
Model Wheel diameter Spindle thread No load speed (RPM) Overall length Net weight GA7020 180 mm (7") 15.87mm (5/8") 8,500/min 473 mm (18-5/8")5.5 kg (12.2 lbs) GA7021 180 mm (7") 15.87mm (5/8") 6,000/min (6,600/min. in Mexico) 473 mm (18-5/8") 5.5 kg (12.2 lbs) GA9020 230 mm (9") 15.87mm (5/8") 6,000/min (6,600/min. in Mexico) 473 mm (18-5/8") 5.8 kg (12.8 lbs)

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country tocountry. • Weight according to EPTA-Procedure 01/2003
USA002-2

GENERAL SAFETY RULES (For All Tools)
WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS.
Work Area 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Electrical Safety 4. Double insulated tools are equipped with a polarized plug ( one blade is widerthan the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. 5. Avoid body contact withgrounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 2

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharpedges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. 8. When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W". These cords are rated for outdoor use and reduce the risk of electric shock. Personal Safety 9. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use toolwhile tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. 10. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 11. Avoid accidental starting. Besure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. 12. Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. 13. Do not overreach. Keep proper footing and balance at all times. Proper footing...