Pequeño
SUBWOOFER
ESPAŃOL FRANÇAIS
CAISSON DE GRAVE
CS-AW8040
CS-AW8240
CS-AW8040
CS-AW8240
For Customer Use:
Enter below the Model No, and Serial
No, which is located either on the rear
or bottom of the speaker unit. Retain
this information for future reference.
Model No.
INSTRUCTION MANUAL
MANUEL D'INSTRUCTIONS
MANUAL DE INSTRUCCIONES
Serial No.LVT1742-001A
ENGLISH
Thank you for purchasing the ARSENAL Car Stereo Speaker. These Speakers can be
mounted in the trunk of your vehicle. For the secure installation and perfect operation
of your speakers, please read the following carefully.
Parts
2. Screw x 10
3. Jump
4. Fuse (10A) x 2
5. Hexagon socket
screw keys
1. Grille
For proper installation and use
1.Before connectingthe speakers to the amplifier, confirm that the power has been
turned off. The click noise generated by the connection if the power is on may
damage the speakers.
2.The amplifier and speakers should be connected between corresponding terminals,
i.e. left to left, and right to right, as well as "+" to "+", and "–" to "–". Connection with
reversed polarity will degrade the quality of stereoreproduction.
3.Do not subject the speakers to excessive input. The power handling capacity of the
CS-AW8240/CS-AW8040 is 1000 watts (R.M.S. MUSIC POWER). Any excessive
input may damage the speakers.
4.The CS-AW8240/CS-AW8040 has an impedance of 2Ω,4Ω,8Ω. Make sure that the
output impedance of the amplifier's speaker terminal is rated at 2Ω,4Ω,8Ω.
5.When cleaning the speakers, use a soft clothand wipe the surface gently. Do not
apply thinner or solvent.
6.Be sure to carefully follow the instructions for:
Cable Connections
Fuse Replacement
Switching the Impedance Selector
Subwoofer Mounting and Smart Trim Ring Installation
Consult Page 19 of this Instruction Manual for details on these procedures.
-2-
Dual 4 Ω Application Diagrams
SERIES
JUMPER
1 Mono Amplifier
1Subwoofer
Jumper set to Parallel
8Ω(4Ω+4Ω) Load
PARALLEL
SERIES
Jumper Plug
-
+
Mono
Bi-Amp
Only
Input
4Ω
Input
-
+
PARALLEL
Jumper Plug
Input
ENGLISH
JUMPER
1 Mono Amplifier
1 Subwoofer
Jumper set to Series
8Ω(4Ω+4Ω) Load
-
+
Mono
4Ω
8Ω
Bi-Amp
Only
Input
-
+
4Ω
4Ω
2Ω
*JUMPER is Removed
1 2ch Amplifier1 Subwoofer
Jumper is Removed
4Ω Load
SERIES
Input
Stereo
-
+
Bi-Amp Configuration 2 Mono Amplifiers
1 Subwoofer Jumper is Removed 4Ω Load
*JUMPER is Removed
PARALLEL
Bi-Amp
Only
+
SERIES
Mono
Input
-
Input
-
+
4Ω
PARALLEL
Bi-Amp
Only
Input
-
+
Mono
4Ω 2-Chan
4Ω
JUMPER
1 Mono Amplifier
2 Subwoofers
Jumperset to Series
Subwoofers wired in Parallel
4Ω Load
SERIES
JUMPER
PARALLEL
SERIES
Jumper Plug
Input
-
+
Mono
4Ω
Bi-Amp
Only
Input
-
+
Input
-
+
4Ω
8Ω
PARALLEL
Jumper Plug
4Ω
Bi-Amp
Only
Input
-
+
4Ω
8Ω
4Ω
JUMPER
1 Mono Amplifier
3 Subwoofers
Jumper set to Series
Subwoofers wired in Parallel
2.6Ω LoadSERIES
JUMPER
PARALLEL
SERIES
Jumper Plug
Input
-
+
Mono
4Ω
Bi-Amp
Only
-
Input
-
+
4Ω
4Ω
8Ω
PARALLEL
SERIES
Jumper Plug
Input
+
JUMPER
Bi-Amp
Only
Input
-
+
Input
-
+
4Ω
8Ω
PARALLEL
Jumper Plug
4Ω
Bi-Amp
Only
Input
-
+
4Ω
8Ω
2.6Ω
JUMPER
1 Mono Amplifier
4Subwoofers
Jumper set to Series
Subwoofers wired in Parallel
2Ω Load
SERIES
JUMPER
PARALLEL
SERIES
Jumper Plug
Input
-
+
Mono
4Ω
Bi-Amp
Only
8Ω
-
4Ω
PARALLEL
SERIES
Jumper Plug
Input
+
JUMPER
Input
-
+
4Ω
Bi-Amp
Only
8Ω
2Ω
-3-
-
4Ω
PARALLEL
SERIES
Jumper Plug
Input
+
JUMPER
Input
-
+...
Regístrate para leer el documento completo.