Router

Configurar no
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started! for
Router>enable
Router#hostname Europa
Router#configterminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Europa
Europa(config)#exit
Europa#
%SYS-5-CONFIG_I: Configured from console by console
Europa#configterminal
Enter configuration commands, one per line. End with CNTL/Z.
Europa(config)#line console 0
Europa(config-line)#password cisco
Europa(config-line)#login
Europa(config-line)#exitEuropa(config)#exit
Europa#
%SYS-5-CONFIG_I: Configured from console by console
Europa (config)#enable secret cisco
Diana (config)#enable password juan
Diana (config)#exit
Diana#
%SYS-5-CONFIG_I:Configured from console by console

Diana#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Diana(config)#line vty 0 4
Diana(config-line)#password jessicaDiana(config-line)#login
Diana(config-line)#exit
Diana(config)#exit
Diana#
%SYS-5-CONFIG_I: Configured from console by console

Diana#config terminal
Enter configuration commands, one per line. End withCNTL/Z.
Diana(config)#interface f0/0
Diana(config-if)#ip addres 131.15.1.0 255.255.255.0
Bad mask /24 for address 131.15.1.0
Diana(config-if)#no shutdown
Diana(config-if)#
%LINK-5-CHANGED: InterfaceFastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Diana(config-if)#description lan
Diana(config-if)#interface f0/1Diana(config-if)#ip address 131.15.200.0 255.255.255.0
Bad mask /24 for address 131.15.200.0
Diana(config-if)#no shutdown
Diana(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to upDiana(config-if)#description lan2
Diana(config-if)#exit
Diana(config)#exit
Diana#
%SYS-5-CONFIG_I: Configured from console by console
Diana#config terminal
Enter configuration commands, one...