Soundstream

2 Ω to Amplifier

T7.154 T7.152

1 Ω to Amplifier

Specifications & Enclosure Recommendations

1 Ω to Amplifier

Over the years, the Tarantula subs have encountered many changes. For 2012,we are getting back to basics. No foo-foo, pretty parts that have no performance value. T7 is all about performance, period. From the High BL motor, to the heat extracting aluminum dust cap, to thelumpy cone, all the parts make sense and have a purpose. So, if you want to pay extra money for a pretty chrome or plastic shrouded woofer, go to the swap meet. If you want your money to pay for sheerperformance, T7 is for you!

2 Ω to Amplifier

Congratulations on your new Soundstream sub-woofer purchase. We greatly appreciate your business. This may look like a run-of-the-mill cardboard box,but it’s actually a protective barrier over one of the finest engineered and assembled sub-woofers available.

Enclosure Dimensions
Soundstream does not provide enclosure dimensions as there areinfinite variables when designing a box, i.e. vehicle, amplifier, music preferences, etc… For designs tailored to your specific needs, please contact us at tech-support@soundstream.com, or1-800-724-1377.

Harmonic Indulgence… Listen and Feel
Features, Parameters, & Dimensions
Non Pressed Paper Pulp Cone Aluminum Heat-sink Dust-cap 8ga. Compression Wire Terminals 2.5” 4300 Coil on AluminumFormer Die-Cast Aluminum Frame
series wired Fs (Hz) Qms Vas (ft³) Cms (mm/N) Mms (g) Xmax (mm) Xmech (mm) Piston Diameter (in) Sd (in²) Qes Re (Ω) Z (Ω) BL (Tm) Rms Power (watts) Qts NO (%) 1w/1m SPL(dB) Voice Coil Diameter (in) Impedance (Ω) M-vd (ft.3) Overall Diameter (in) Overall Height (in) Mounting Depth (in) Cutout Diameter (in) Flange Width (in) Flange Height (in) Weight (lbs)

EnclosureConstruction
All enclosures should be made of .75” (3/4”) material only. When possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth of the enclosure to compensate. All volumes...