Tolomatic

LS LINEAR SLIDE RoDLESS CyLINDER

CoNtENtS Features . . . . . . . . . . . . . . . . . . . . . . . . . . LS_2 LS05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LS_4 LS10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LS_6 Auxiliary .Carrier . . . . . . . . . . . . . . . . .. . LS_8 LS .Supports . . . . . . . . . . . . . . . . . . . . . . LS_10 Switches . . . . . . . . . . . . . . . . . . . . . . . . . LS_11 Proximity .Sensors . . . . . . . . . . . . . . . . LS_13 Shock .Absorbers . . . . . . . . . . . . . . . . . LS_14 Application .Data .Worksheet . . . . . . LS_15 Selection.Guidelines . . . . . . . . . . . . . . LS_16 Application .Guidelines . . . . . . . . . . . BC4_32 Service .Parts . . . . . . . . . . . . . . . . . . . . . LS_17 Ordering . . . . . . . . . . . . . . . . . . . . . . . . . LS_18

www.tolomatic.com



LS_1

ENGR

PB

CC

MG

LS

BC4

BC3

BC2

MXP

ABt

LS - LinearSLide


Endurance Technology features are designed for maximum durability to provide extended service life.

ToLoMaTic… The rodLeSS cyLinder Leader
steel guide rods
• Two precision ground steel guide rods integrated with extrusion provides positive support of load • Retained dust band keeps contaminants from entering the cylinder interior, protecting components for reducedmaintenance and increased uptime

Adapted from the popular BC2, the Linear Slide features 2 precision steel guide rods integrated with the extrusion to provide positive support of the load. This makes the Linear Slide more rugged and capable with greater load capacity and higher bending moments. Built-to-order in stroke lengths up to 72 inches.

retained dust band

• Fatigue resistant stainlesssteel bands are specifically made to offer longer life and will not elongate like elastomers • Outer band keeps out contaminants for extended performance • Inner band provides a smooth surface for less seal wear

• Keeps contaminants from entering the sealing area • Protects internal components • Reduces maintenance while increasing productivity

• Stronger, stiffer tube retainstolerance specs when chamber is pressurized • Keeps sealing band in place for maximized air efficiency • Tube supports are minimized • Solid structural support provides durability and long life performance

• Single End Porting • Standard feature • Simplifies air connections

3-ported heads

• Provides maximum strength at major stress points • Heat treated carbon steel withstands thetoughest dynamic forces • Strongest bracket design in the industry assures long life with less maintenance

Formed steel piston bracket

• Load and piston are independent - piston floats, resulting in less friction and longer seal life • Bearings offer consistently low friction and long wear; 1/2" bore features composite bearings, 1" bore features precision linear ball bearingsload-bearing carrier design

• Substantially higher load capacity • Substantially higher bending moment capacity • Used for intermediate support • Flush with bottom of actuator to retain low profile • Drop-in, adjustable mounting locations

SupporTS MP

T-nuTS

• Used for intermediate support, combine with Tube Supports or mount directly to surface • Smooth deceleration • Allowsincreased operating speed • Self-compensates for load or speed changes • Minimizes impact load to equipment • Higher equipment productivity • Integrated to carrier design

Shock abSorberS SL SH

SwiTcheS

• Available in Proximity, Reed, Hall-effect and Triac • 15ft. cable with flying leads; available with quickdisconnect couplers

LS_2



1.800.328.2174

www.tolomatic.com...