Explanation Of A Production Process Of The Office Furniture

Explanation of a production process of the office furniture

1. Receipting. – First the timber is received and verified that meets the specifications, it is not broken, warped, cracked andexcessive knots. Must verify that the wood has low moisture content, for which there digital meters to accurately determine the feasibility and wood moisture.

2. Selecting - Second the wood is selectedbackrests, armrests, etc. sure that in the outer parts visible using the best wood: free of knots, with uniform grain and unstained.

3. Tracking area. - Subsequently the timber is transported manuallyto the plot area.

4. Tracking. - Later the plot the patterns are made to the layout of the squares to be cut, these patterns can be produced in wood, and once they verify the accuracy ofmeasurement is applicable to the stroke on the wood.

5. Cutting area. - Next the timber is transported manually to the cutting area.

6. Courting. – Then if the wood for furniture production is planedshould brush with a brush either manually or through the planer, to give a good finish if the wood is not uniform in thickness planer should use a to give the predetermined uniform thickness. Based onthe layout of the furniture pieces is come to make the cut dimensioned wood, this first cutting step involves cutting wood without even specifying the exact shape of the pieces, for this court maypreferably be used a saw circular. Then the dimensional lumber is cut to the precise shape of the cut parts is preferably performed with a band saw. Once cut the pieces to their size should be developedon parts of circular holes or rectangular needed for assembly. Also be compiled the songs finishes, moldings, grooves and tongue and groove parts, for the latter operations may be used operations maybe used or Mortises spins and drills. As a final step of cutting the pieces must be sanded to give the pre finishing needed for assembly, which is possible to do it manually or with a machine sander...