Ingeniero En Electronica

Output and Mechanical Detail

User’s Guide
for the
WEB LABEL WEB LABEL

LRD6110 and LRD6110C Label Sensors
from

Lion Precision
Dark Switching Output Polarity = +V Outputs

LightSwitching Output Polarity = GND

Outputs

M4x.7 (x4)

5.50" 140mm

0.20" 5.1mm

1.00" 25.4mm 0.60" 15.2mm

1.20" 30.5mm

0.60" 15.2mm

Gap 0.03" 0.76mm

Specifications
Voltage Current on oroff Switching Frequency Output Current (sinking or sourcing) Switching output Operating Range Supply Switching output 11-28 VDC (reverse polarity protected) 50mA 20µs max 10kHz max 150mA max(overload protected) PNP or NPN, dark or light switching 40°F to 140°F (4°C to 60°C) Inverse Polarity Protection Short Circuit and Overload Protection

Power supply Response time Output TemperatureProtections

Lion Precision
563 Shoreview Park Road St. Paul, MN 55126 651-484-6544 www.lionprecision.com Document Number: M015-3380.016

Connecting to the Sensor Warnings:
Sensor body is connected toGround. Unused wires must be insulated from contact with other objects. All power must be off when installing the sensor. Brown wire (Output Polarity) must be connected to +V or Ground for reliableoperation. LRD6110 with Integral Cable Wire Color Red Black Green Blue Brown Connection +Vin (11-28VDC) Ground NPN Output PNP Output Output Polarity (light/dark switching) Notes
Red +11 to 28VDC NPNLoad Green Blue PNP Load Black Brown Ground Polarity Invert NPN Output 150mA max. PNP Output 150mA max.

Setup Procedure
1. 2. 3. 4. Web must remain in contact with the mounting plate. Label mustpass under the [-SENSOR-] indicator. Small labels should be centered under the [-SENSOR-] indicator. When properly setup, the lights will move between WEB and LABEL. The lights in the “X” region shouldonly light briefly during the transition between WEB and LABEL regions.

Sensor Setup
1. Turn Span at least four turns counter-clockwise, then two turns clockwise (this is the mid-point of the...