Redes

Authorized Self-Study Guide, Interconnecting Cisco Network
Devices, Part 2 (ICND2) Third Edition

CCNA ICND2 Official Exam Certification Guide, Second Edition

CCNA: Cisco Certified Network Associate Study Guide
Chapter 7 - Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
Chapter 8 - Layer 2 Switching and Spanning Tree Protocol (STP)
× Cisco Network Assistant
Chapter 9 -Virtual LANs (VLANs)
× Telephony: Configuring Voice VLANs
× Using the CNA to Configure VLANs and Inter-VLAN Routing
Chapter 10 – Security
× Perimeter, Firewall, and Internal Routers
× Recognizing Security Threats
× Mitigating Security Threats
× Advanced Access Lists
× Configuring Access Lists Using SDM
Chapter 11 - Network Address Translation (NAT)
× Configuring NAT Using SDM
Chapter 13 -Internet Protocol Version 6 (IPv6)
Chapter 14 - Wide Area Networks
× Cable and DSL
× Using SDM for WAN Connections

CCNA Cisco Certified Network Associate Study Guide
Chapter 13: VLANs and Trunks
Chapter 14: Switches and Redundancy
Chapter 20: OSPF Routing
Chapter 21: EIGRP Routing
Chapter 22: Access Control Lists
Chapter 23: Address Translation
Chapter 24: IPv6
Chapter 25: WANIntroduction
Chapter 26: Frame Relay

CCNA Exam Prep (Exam 640-802)

Chapter 5: IP at the Network Layer
√ IPv6
Chapter 12: Link-State and Hybrid Routing Protocols
× Configuring OSPF with SDM
× EIGRP Configuration Using SDM
Chapter 13 - Foundation Switching Operations
Chapter 14 - Enhanced Switching Operations
Chapter 15 - Virtual LANs
Chapter 19 - Using Cisco Access Lists
Chapter 20 -Enabling Internet Connectivity with NAT
× SDM
Chapter 21 - Command-Line NAT Implementation
Chapter 22: Wide Area Network Connections
Chapter 23: Frame Relay
Chapter 24: Understanding VPN Connectivity

31 Days Before Your CCNA Exam
Day 25 - Verifying and Troubleshooting Basic Switch Configurations
Day 24 - Switching Technologies and VLAN Concepts
Day 23 - VLAN and Trunking Configurationand Troubleshooting
Day 22 - VTP and Inter- VLAN Routing Configuration and Troubleshooting
Day 21 - IPv4 Address Subnetting
√ VLSM, Summarizing Subnet Addresses
Day 20 - Host Addressing, DHCP, and DNS
Day 18 - Basic Routing Concepts
Day 14 - Basic Routing Concepts Static, Default, and RIP Routing
Day 13 - EIGRP Routing
Day 12 - OSPF Routing
Day 11 - Troubleshooting Routing
Day 7 - ACLConcepts and Configurations
Day 6 - Verifying and Troubleshooting ACL Implementations
Day 5 - NAT Concepts, Configuration, and Troubleshooting
Day 4 - WAN and VPN Technologies
Day 3 - PPP Configuration and Troubleshooting
Day 2 - Frame Relay Configuration and Troubleshooting

CCNA Self-Study CCNA Portable Command Guide
CHAPTER 7 - Static Routing
CHAPTER 8 – RIP
CHAPTER 10 - Single AreaOSPF
CHAPTER 12 – VLANs
CHAPTER 13 – VLAN Trunking Protocol and Inter-VLAN Routing
CHAPTER 14 - STP and EtherChannel
CHAPTER 23 - Network Address Translation
CHAPTER 25 - IPv6
CHAPTER 26 - HDLC and PPP
CHAPTER 27 - Frame Relay
CHAPTER 28 - IP Access Control List

CCNA Flash Cards

1. Implementing VLAN and Trunks
2. Redundant Switching and STP
3. Troubleshooting Switched Networks
4.Routing Operations and VLSM
5. Implementing OSPF in a Single Area
6. Implementing EIGRP
7. Managing Traffic with Access Lists
8. Managing Address Space with NAT and IPv6
9. Establishing Serial Point-to-Point Connection
10. Establishing Frame-Relay Connection

CCNA Video Mentor
LANs – Lab1 – Configuring VLANs
LANs – Lab2 – VTP Server and Clients
Routing Protocols - Lab3 - RIP with SplitHorizon, Route Poisoning & Poison Reverse
Routing Protocols - Lab4 – Single and Multi-Area OSPF Configuration
Routing Protocols – Lab5 – EIGRP Configuration and Operation
Routing Protocols – Lab6 – Understanding EIGRP Metric Calculations
Scaling IP Addresses – Lab 7 – NAT Overload (PAT)
Scaling IP Addresses – Lab 8 – IPv6 Subnetting and Address Configuration
WAN – Lab 9 – PPP and CHAP...