Apuntes auto cad
Escalas
* 1/100 = 0.1
* 1/50 = 0.05
* 1/25 = 0.025
* 1/200 = 0.2
Para poner Formato
* MVSETUP
* N
* M
* ESCALA
* MEDIDAS DEL FORMATO
A2= 594 Y 420
A3= 420 Y 297
Alinear
* Al
* Seleccionar Objeto
* Seleccionar punto 1, enter
* Seleccionar punto 2, enter
* Enter, enter
Snap (para mejor exactitud)
En la parte de abajocuadrito con esquina naranja, botón derecho, settings.
Siempre encendido:
* Endpoint
* Midpoint
* Center
* Node
* Intersection
* OJO, nunca seleccionado extension niperpendicular.
Dividir en partes exactas
* Draw
* Multiple Points
* Divide
* Seleccionar la línea a dividir
* Escribir la cantidad de veces a dividir y Ok
Texto
* Format
* TextStyle
* Height 0.5
* Apply
* Set Current y Ok
Para Escribir el Texto
* Draw
* Text
* Single Line
* Rotacion 0
Para Cotas
* Primero hacer Format con el nombreCotas
* Lines
* Dimension Lines
* Lineweight: 0.13 mm
* Baseline Spacing: 0
* Supress: No seleccionar Ninguna
* Extension Line
* Supress: Ningunade las 2
* Lineweight: 0.13 mm
* Extend beyond dim a escala 0.1 poner 0.20
* Offset beyond dim a escala 0.1 poner 0.20
* Simbols & Arrows
* Arrowhead* Closed Filler, Dot o Architectural Tick
* Text
* Text Style
* Cotas
* Text Placement
* Vertical: above
* Horizontal: como sea pero mejor center* View Direction: Como sea pero puede ser horizontal
* Offset from dim line: 0.1
* Text Alignment: cualquiera pero puede ser horizontal
* Fit
* Fit Options* Both text and Arrows
* Text Placement
* Overdimension line, without leader
* Primary Units
* Unit Format: Decimal
* Precision: 0.00
* Decimal...
Regístrate para leer el documento completo.